Cisco Catalyst 2960-XR Hardware-Installationshandbuch - Seite 29

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Schalter Cisco Catalyst 2960-XR herunter. Cisco Catalyst 2960-XR 34 Seiten.
Auch für Cisco Catalyst 2960-XR: Handbuch "Erste Schritte (25 seiten), Hardware-Handbuch (20 seiten)

Seite drucken

Cisco Catalyst 2960-XR Hardware-Installationshandbuch

1. Installation Guidelines

Switch Installation

Procedure

Step 1

Attach an ESD-preventive wrist strap to your wrist and to a bare metal surface.

Step 2

Find the send (TX) and receive (RX) markings on the module top.

On some SFP or SFP+ modules, the send and receive (TX and RX) markings might be replaced by arrows

that show the direction of the connection.

Step 3

If the module has a bale-clasp latch, move it to the open, unlocked position.

Step 4

Align the module in front of the slot opening, and push until you feel the connector snap into place.

Step 5

If the module has a bale-clasp latch, close it.

Step 6

For fiber-optic SFP or SFP+ modules, remove the dust plugs and save.

Step 7

Connect the SFP cables.

Figure 24: Installing an SFP Module

Removing an SFP Module

Cisco Catalyst 2960-XR Hardware-Installationshandbuch - Seite 29

Connecting to SFP and SFP+ Modules