Crestron Isys TPS-5000 Handbuch für den Außendienst - Seite 6
Blättern Sie online oder laden Sie pdf Handbuch für den Außendienst für Touch Panel Crestron Isys TPS-5000 herunter. Crestron Isys TPS-5000 12 Seiten. Crestron tps-5000 touchpanel: service manual
Auch für Crestron Isys TPS-5000: Installationshandbuch (16 seiten)
Seite drucken
Isys™ Touchpanels
Remove Touchpanel Nose Screws
2
Field Service for Isys™ TouchPanel: FSKTPS-5000/6000
4. To prevent scratching of the screen, place the touchpanel facedown onto a
padded surface.
5. While holding the touchpanel nose in place, use a #1 Phillips screwdriver to
loosen and remove the four screws that secure the touchpanel nose. Refer to the
diagram below.
6. Place the touchpanel upright on the work surface.
7. As shown on the next page, slide the nose forward to expose the three connectors
and grounding strap that connects the nose to the motherboard.
8. Carefully disconnect three cables.
9. Use the touchpanel position lock buttons to adjust the touchscreen to the
minimum (most horizontal/down) angle.
10. Use the flexible tip Phillips screwdriver to loosen and remove the grounding
strap secured by the grounding screw.
11. Re-install the grounding screw.
Crestron FSKTPS-5000/6000
Field Service Guide - DOC. 5956