FIBARO Walli Outlet E Handbuch - Seite 13
Blättern Sie online oder laden Sie pdf Handbuch für Zubehör FIBARO Walli Outlet E herunter. FIBARO Walli Outlet E 17 Seiten. Outlet
Seite drucken
17/06/2019
Press and hold the button to enter the menu, device blinks to signal adding status (see: Visual
1
indications).
Release the button when device signals desired position with colour:
2
GREEN – reset energy consumption memory
MAGENTA – start Z-Wave range test
YELLOW – reset to factory defaults
Quickly click the button to con rm.
3
Resetting to factory defaults
Reset procedure allows to restore the device back to its factory settings, which means all information about
the Z-Wave controller and user con guration will be deleted. Resetting to factory defaults does not reset
energy consumption memory.
Resetting the device is not the recommended way of removing the device from the Z-Wave network.
Use reset procedure only if the primary controller is missing or inoperable. Certain device removal
can be achieved by the procedure of removing described.
Use the button only with FIBARO cover to ensure safety.
Press and hold the button to enter the menu.
1
Release the button when the device glows yellow.
2
Quickly click the button to con rm.
3
Device will blink yellow to con rm.
4
After a few seconds the device will be restarted, which is signalled with red LED colour.
5
Additional features
Power and energy metering
The device allows for the active power and energy consumption monitoring. Data is sent to the main Z-Wave
controller, e.g. Home Center.
Measuring is carried out by the most advanced microcontroller technology, assuring maximum accuracy and
precision (+/- 1% for loads greater than 5W).
Electric active power – power that energy receiver is changing into a work or a heat. The unit of active
power is Watt [W].
https://manuals.fibaro.com/walli-outlet/
Walli Outlet - E/F | FIBARO Manuals
Back To Top
Back To Top
13/16