Sharp AX1200S - 22" SuperSteam Oven Installationsanleitung Handbuch
Blättern Sie online oder laden Sie pdf Installationsanleitung Handbuch für Mikrowellenherd Sharp AX1200S - 22" SuperSteam Oven herunter. Sharp AX1200S - 22" SuperSteam Oven 8 Seiten. Supersteam oven
Auch für Sharp AX1200S - 22" SuperSteam Oven: Betriebshandbuch (43 seiten), Spezifikationen (2 seiten), Betriebshandbuch (43 seiten)
Seite drucken
INSTALLATION INSTRUCTIONS
IMPORTANT:
This Built-In Kit is designed for use with Sharp SuperSteam Ovens specifying a RK-12S30
Built-In Kit on the rating label on the front of the oven.
The cabinet or wall opening must be within the following dimensions:
HEIGHT
WIDTH
DEPTH
The completed built-in kit frame assembly dimensions:
HEIGHT
WIDTH
NOTE: The bottom of the cut-out opening for built-in use must be 36 inches (915 mm) or higher from the floor.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION!
The electrical requirements for this oven are 120 volts, 15 amps. The oven has a 5-15 plug
and requires a 5-15 receptacle.
PROVIDED PARTS
EXHAUST DUCT
EXHAUST
BACK
DUCT UPPER
DIVIDE PLATE L
EXHAUST DUCT BOTTOM
REAR SPACER
SCREW (A) - SHORT
SCREW (B) - MIDDLE
* For walls other than wood, you may need screws appropriate for that
wall to install the frame.
* Be sure to DISCONNECT THE PLUG of the oven from the electrical
outlet before installing the oven and kit.
* Because the kits are metal, due caution should be used in handling
and installation to avoid the possibility of injury.
BUILT-IN KIT MODEL
1
19" to 19
/
" (482 mm - 486 mm)
8
1
28" to 28
/
" (710 mm - 719 mm)
4
1
23
/
" minimum (509.5 mm minimum)
4
1
19
/
" (495mm)
2
30" (762mm)
RECTIFIER
PLATE L
EXHAUST
DIVIDE PLATE R
DUCT LEFT
FRAME
ASSEMBLY
SCREW (C) - LONG
1
RK-12S30
PART NAME
EXHAUST DUCT BACK
PDVC-B107WRWZ
EXHAUST DUCT UPPER
PDVC-B105WRWZ
DIVIDE PLATE L
PSKR-A486WRWZ
DIVIDE PLATE R
PSKR-A487WRWZ
RECTIFIER PLATE L
PSKR-A484WRWZ
EXHAUST DUCT LEFT
PDVC-B108WRWZ
EXHAUST DUCT RIGHT
PDUC-B117WRWZ
EXHAUST DUCT BOTTOM
PDVC-B106WRWZ
EXHAUST
FRAME ASSEMBLY
DUCT
FDEC-A004WRKZ
RIGHT
SCREW(A)
XHTS740P08000
SCREW(B)
XMMS841P13000
SCREW(C)
XMSS827P25000
REAR SPACER
PSPAFA003WRWZ
5
CUSHION 1
/
15 mm x 405 mm
PCUS-A245WRPZ
1
CUSHION 2
/
5 mm x 618 mm
PCUS-A247WRPZ
CUSHION 3 1
30 mm x 689 mm
PCUS-A249WRPZ
1
CUSHION 4
/
5 mm x 305 mm
PCUS-A251WRPZ
1
CUSHION 5
/
5 mm x 382 mm
PCUS-A253WRPZ
TINSEB184WRRZ-D92
Q'TY
1
1
1
1
1
1
1
1
1
23
2
4
1
" x 16",
8
2
3
" x 24
/
",
4
8
1
1
1
/
" x 27
/
",
8
8
1
" x 12",
4
1
" x 15",
4
1
Printed in Thailand