Digistar 410002 Installationshandbuch - Seite 3

Blättern Sie online oder laden Sie pdf Installationshandbuch für Messgeräte Digistar 410002 herunter. Digistar 410002 9 Seiten. Rotation counter for ez/tmr xx10 series indicators

Seite drucken

Introduction

INTRODUCTION

Thank you for equipping your Digi-Star Scale System with the Rotation Counter feature. The Rotation Counter

Sensor allows the scale Indicator to both; count the number of revolutions of the PTO shaft, and track when the

PTO is on. This in turn allows the scale Indicator to utilize the Rotation Counter function, record Hours of Use,

and properly display a Maintenance Message.

See your EZ/TMR Indicator Operators Manual for more information on how to utilize these functions.

This installation manual will guide you through the steps necessary to install the Rotation Counter Sensor and

Cabling for the Rotation Counter feature.

D4044-EN Rotation Counter Installation Manual Rev B LBW

permission is forbidden. The contents of this manual are subject to change without notice. All efforts have been made to

assure the accuracy of the contents of this manual. However, should any errors be detected, Digi-Star would greatly

appreciate being informed of these errors. The above notwithstanding, Digi-Star can assume no responsibility for errors in this

manual or their consequence.

D4044

Rotation Counter Installation Manual for EZ/TMR xx10 Series Indicators