Sharp Aquos LC 32GD9E Betriebshandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC 32GD9E herunter. Sharp Aquos LC 32GD9E 40 Seiten. Lcd colour television

Seite drucken
Sharp Aquos LC 32GD9E Betriebshandbuch
Menu operations

Erase Programme

An individual programme can be erased.
1
Repeat steps 1 to 4 in Programme Setup.
2
Press c/d to select "Yes", and then press OK.
3
Press a/b/c/d to select the channel you want
to erase, and then press OK.
• A message screen pops up.
4
Press c/d to select "Yes", and then press OK to
erase the selected programme. All the subsequent
programmes move up.
5
Repeat steps 3 and 4 until all desired channels
are erased.

Child Lock

Allow you to use a PIN to protect certain settings from
being accidentally changed.
Changing the PIN
1
Press MENU and the MENU screen displays.
2
Press c/d to select "Setup".
3
Press a/b to select "Child Lock", and then press
OK.
Change PIN
Reset
4
Enter the 4-digit number as a PIN using 0 – 9.
5
Enter the same 4-digit number as in step 4 to
confirm.
• "The system PIN has been changed successfully"
displays.
NOTE
• To view a locked channel, you must enter a PIN. (See
pages 16 and 27 for locking channels from viewing in
analogue TV and DTV mode.) When you select a locked
channel, a PIN prompt message pops up. Press OK to
display the PIN input window.
TV only
New PIN
–
–
–
–
Reconfirm
–
–
–
–
Resetting the PIN
Allow you to reset your PIN to the factory preset "1234".
1
Repeat steps 1 to 3 in Changing the PIN.
2
Enter the PIN.
3
Press a/b to select "Reset", and then press OK.
4
Press c/d to select "Yes", and then press OK.
NOTE
• As a precautionary measure, make a note of your PIN
on the back of this operation manual, cut it out and
keep it in a safe place that children cannot reach.
• See page 32 for resetting the current PIN to the factory
preset "1234" if you lose or forget your PIN.

Input Label

You can assign each input source a label you like.
1
Press b to select the desired input source.
2
Press MENU and the MENU screen displays.
3
Press c/d to select "Setup".
4
Press a/b to select "Input Label", and then press
OK.
5
Press a/b/c/d to select each character of the
new name for the input source, and then press
OK.
6
Repeat step 5 above until the name is fully spelt
out, and then press OK.
• The name can be 6 characters or less.
• If a label name is less than 6 characters, select
"END", then press OK.
NOTE
• You cannot change the label if the input source is TV or
DTV.

Fine Sync.

Menu Operation: C (Page 12)
Ordinarily, the TV automatically adjusts image positions
coming from PC (Auto Sync. function). In some cases,
however, manual adjustment is needed to optimise the
image.
Item
H-Pos.: Centres the image by moving it to the left or right.
V-Pos.: Centres the image by moving it up or down.
Clock: Adjusts when the image flickers with vertical
stripes.
Phase: Adjusts when characters have low contrast or
when the image flickers.
NOTE
• If you need to adjust the image position, adjust the position
using your PC.
PC only
17