Sharp Aquos LC-26GD7E Betriebshandbuch - Seite 14
Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC-26GD7E herunter. Sharp Aquos LC-26GD7E 42 Seiten. Lcd colour television
Seite drucken
First installation
If you receive only one satellite...
In the following menu enter whether the station search is to take place
7.
in the high and low band ("yes") or only in the low band ("no").
Note: A station search is necessary in both bands with most satellites.
The standard frequencies 9750 MHz and 10600 MHz are entered for
8.
the low-band and high-band.
If your satellite antenna is fi tted with an LNC (LNB) with a different
oscillator frequency, enter the corresponding frequency for high and
low band respectively.
Note: The correct display for the reception frequencies in the menu
"Set station manually" depends on this setting!
You should see a picture and hear the sound with the settings previ-
9.
ously carried out (only for ASTRA 1 and HOTBIRD). Now press OK.
You can select the default pre-programming in the menu "Use pre-
10.
programming" for fast programming of the satellite stations.
Please select "no" to ensure that all stations currently receivable are
searched for and saved.
Symbol rates: The standard symbol rates 22000 and 27500 are
entered.
If you wish to receive stations with other symbol rates, please enter
the corresponding values here using the number buttons of the remote
control.
With OK you get an overview of which settings are to be used for
11.
automatic programming.
Press the OK key again, the station search starts.
12.
The TV searches for, sorts and stores all the receivable TV stations
according to their settings and the connected antenna.
When the TV stations are stored, you get a message.
13.
Radio stations are then searched for with OK .
After storing the radio stations you get the "AV setup" menu by
14.
pressing the OK key.
Select "yes" if you want to connect/log in a VCR, DVD player etc. Fol-
low the "Connection wizard" and connect the equipment to the TV set
according to the connection diagram. The menu is hidden if you select
"no".
Note: You can repeat the initial start-up at any time, e.g. after moving.
The "Repeat initial installation" function deletes any stations already
stored!
1.
Press the INFO key.
2.
Then select the item "Repeat initial installation" and press OK.
12
Station sorting
Note: not with DVB-T stations in UK (refer to note on "LCN" on page 13).
You can later change the station sorting performed automatically when-
ever and however you wish, see "TV menu – Setup – Channels – Change
stations".
DVB-T antenna position
Note: not with DVB-T stations in UK.
If you receive one or more digital terrestrial stations (DVB-T) with picture
and sound interference using your room antenna, you should change the
location of the antenna.
For optimum alignment or determination of the suitable installation
location of the antenna your TV set has an indicator for the signal quality
("C/N") and signal strength Level.
Ask your dealer on which channels and frequency bands (VHF or UHF)
digital TV stations are broadcast in your area.
Several digital stations are transmitted on one channel.
Choosing a TV channel
1.
Call the "TV menu" with the MENU button.
2.
Select the "Setup" line and confi rm with OK.
3.
Select the "Channels" line and confi rm with OK.
TV menu
Setup
Picture
Channels
Parental lock
Timer functions
Language
Miscellaneous
4.
Select "Manual tune" and confi rm with OK.
TV menu -> Setup -> Channels
Manual tune
Signal source
Channel
Frequency
Name
Bandwidth
C/N 40
5.
For digital stations select
"Signal source – DVB-T".
Sound
Recording
Connections
Change stations
Search wizard
Antenna/cable (analogue)
DVB-T
DVB-S
E08
196.25 MHz
ARD
7 MHz
Level 73