Sharp Aquos LC-32SH330E Betriebshandbuch - Seite 19
Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC-32SH330E herunter. Sharp Aquos LC-32SH330E 34 Seiten. Lcd colour television
Seite drucken
TV menu
E Automatically switch the TV to standby
(Sleep timer)
Sleep timer switches the TV to standby after a defined
period of time.
1�
Press MENU on the remote control and select
Features ≥ Time.
2�
Press OK or ≥ to enter Time.
3�
Press <> to select Sleep Timer�
4�
Press ≤≥ to select the period of time before
TV enters to standby.
5�
Follow the on-screen instructions to exit.
NOTE
• When you press any button on the remote control with
less than three minutes left in the countdown, Sleep
timer will be automatically canceled.
SCART
You can set the specific type of signal going into
SCART terminal. Check the signal output type of the
DVD or other equipment connected to the SCART
teminal of the TV, referring to manufacturer's instruction
of those devices. Select the correct input signal setting
for SCART.
NOTE
• This option is available only when the input source is
SCART.
Use subtitles
You can enable subtitles for each TV channel.
Subtitles are broadcasted via teletext or DVB-T digital
broadcasts. With digital broadcasts, you have the
additional option of selecting a preferred subtitle
language.
E Set analogue subtitles
1�
Press MENU on the remote control and select
Features > Subtitle�
2�
Press OK or ≥ to enter Subtitle.
3�
Select Analogue Subtitle.
4�
Press ≤≥ to select On to display subtitle
always or On During Mute to display subtitles
only when audio is muted. Select Off to close
subtitles.
5�
Follow the on-screen instructions to exit.
18
E Select a subtitle language on digital TV
channels
When you select a subtitle language on a digital TV
channel as described below, the preferred subtitle
language set in the TV menu is temporarily overruled.
1�
Press MENU on the remote control and select
Features > Subtitle�
2�
Press OK or ≥ to enter Subtitle.
3�
Press <> to select 1st Subtitle or 2nd
Subtitle.
4�
Highlight your selection and press ≤≥ to select
a subtitle language.
5�
Follow the on-screen instructions to exit.
NOTE
• If your selected subtitle language is not broadcast, the
default language subtitle will be displayed.
• If the 1st Subtitle language you selected is not
available, the 2nd Subtitle language will be displayed.
E Select Hearing impaired subtitle
When watching channels with hearing impaired service,
you can enable the subtitle commentary for the hearing
handicapped. For digital channels only.
1�
Press MENU on the remote control and select
Features ≥ Subtitle.
2�
Press OK or ≥ to enter Subtitle.
3�
Press <> to select Subtitle Type.
4�
Press ≤≥ to select Hearing impaired as your
subtitle type.
5�
Follow the on-screen instructions to exit.
Teletext language
You can select Teletext Language when the TV receives
Teletext signals broadcast by a TV network. (See page
11.)
Common Interface
This function enables you to watch encrypted services
(pay services). (See page 25.)
NOTE
• This functions may not work depending upon the
country broadcasting circumstances.