Sharp Aquos LC-32WT1E Betriebshandbuch - Seite 24
Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC-32WT1E herunter. Sharp Aquos LC-32WT1E 38 Seiten. Aquos lcd colour television
Auch für Sharp Aquos LC-32WT1E: Betriebshandbuch (38 seiten)
Seite drucken
DTV menu operations
To enter and operate the digital TV on-screen display
menus, use the following buttons on the remote control.
0–9
DTV
EPG
ESG
RADIO
DTV
MENU
/ / /
OK
END
Colour
RETURN
Downloaded from
www.Manualslib.com
Press to display the subtitle selection screen.
Press to display teletext or the MHEG5
presentation, if available. If both are available,
press for MHEG5. Press for 1-2 seconds for
teletext.
Press for direct channel entry.
Switches between analogue TV mode and
digital TV mode.
Press to open the EPG (Electronic
Programme Guide) screen.
Press to open the ESG (Electronic Service
Guide) screen.
Press to switch between TV and RADIO.
Press to open the multi audio screen.
Press to open or close the DTV Main Menu
screen.
Press to open the service banner or view
detailed information from the EPG/ESG
screen.
Press to move through the on-screen display
menu, select an item on the screen, or adjust
an item.
Press to select or execute a highlighted item.
Press to access the programme list.
Press to exit the on-screen display menus.
Each of the coloured buttons have a unique
function assigned in the menu screen.
Press to return to the previous menu.
manuals search engine
Using the on-screen display
The DTV on-screen display menus operate in a similar
manner to the main on-screen display menus (except the
exact colouring differs slightly). (See page 11.)
Common Operations
1
Press DTV to access DTV mode.
2
Press DTV MENU to open the DTV on-screen display
menus.
3
Press
/
to select the desired menu, and then press
OK.
•
Press
/ / /
and OK to move through the on-
screen display menus and modify settings. Some
menu operations differ depending on the item you
are going to adjust. See the specific instructions in
this section for more information.
Timer
The Timer setting allows you to set the TV to automatically
tune to a digital TV-event when its on-air time begins.
Use this feature to automatically output audio and video
through the SCART connection for recording purposes.
1
Press DTV MENU.
2
Press
/
to select Timer, and then press OK.
•
The currently programmed TV-event timers are
displayed.
3
Press the coloured button to complete the desired
task.
•
YELLOW — Delete or cancel the selected timer.
Press
/
to select the desired timer and then
press the Yellow button to delete it. Press
GREEN to confirm.
•
GREEN — Add a new timer. See "New Timer".
•
BLUE— Edit a timer. Press
desired timer and then press the BLUE button to
edit it. See "New Timer" step 3.
/
to select the
22