Sharp Aquos LC-40LE540E Betriebshandbuch - Seite 24
Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC-40LE540E herunter. Sharp Aquos LC-40LE540E 44 Seiten. Lcd colour television
Seite drucken
Basic adjustment
Channel settings
Channel
Channel adjustments
Allows to reconfigure the channels after initial auto
installation has been completed.
Install channels
●
●
Auto tuning
This function allows you to select the country and
automatically adjusts the channels for digital, cable,
satellite (Only LE542 model series) or analogue
individually.
●
●
DTV manual tuning
Allows you to tune digital channels manually.
●
CADTV manual tuning
Allows you to add new cable services manually.
This setting appears after searching for cable broadcasts.
●
SADTV manual tuning (Only LE542 model series
Allows you to add new satellite services manually.
This setting appears after searching for satellite broadcasts.
See next page.
●
ATV manual tuning
Allows you to tune in analogue channels manually.
●
Programme edit
Allows you move channels, delete channels, skip
channels and to set up a favourite channels list.
Select the channel you want to reorganize and press
◄/►to change between Viewable, Skipped (to
ignore it) and Favorite (to add it to favorite list). Press
the RED button to delete it, the YELLOW button to
move it (use ◄/► to move up or down the channel list
pages) or GREEN button to rename it.
NOTE
•
If you choose FAV by pressing TV/RADIO/FAV button, the
favourite channel list will appear.
●
Satellite edit
(Only LE542 model series)
Allows you to adjust the satellite propierties.
●
●
Signal information
Shows the signal power and quality.
●
●
CI information
Allows to see the CA card information (Conditional
Access Module): name, supplier and OSD.
●
●
Auto channel number
Automatic channel sorting.
●
●
Additional search
Use this menu to add new services automatically.
22
Searching for cable broadcasts
●
●
CADTV Auto Tuning
Allows you to add cable services.
1 With ▲/▼/◄/► keys select Channel, then select
Auto Tuning and press OK.
2 With ▲/▼/◄/► keys select Country and Tuner
type (CADTV).
3 Go to Start Search and press OK.
●
●
CADTV Manual Tuning
After the CADTV Auto tuning, you may add new
cable services manually.
1 With ▲/▼/◄/► keys select Channel and CADTV
Manual tuning and press OK.
2 Select manually Frequency and Symbol rate by
using numerical keys (Remote Control).
)
3 With ▲/▼ keys select Modulation and press OK.
4 Select the Modulation from the list, confirm by
pressing OK and press 6 to return.
5 With ▲/▼ keys select Start Search and press OK.
NOTE
•
The
value
of
"Modulation" should be set to the value specified by the
cable provider.
"Frequency",
"Symbol
rate"
and