Sharp Aquos LC-42BX5H Betriebshandbuch - Seite 37

Blättern Sie online oder laden Sie pdf Betriebshandbuch für LCD-FERNSEHER Sharp Aquos LC-42BX5H herunter. Sharp Aquos LC-42BX5H 50 Seiten. Lcd colour television

Seite drucken
Useful adjustment settings

HDMI Setup

HDMI (High-Defi nition Multimedia Interface) terminal
selection.
To watch an HDMI equipment image, select
1
"INPUT4" or "INPUT5" using TV/VIDEO on the
remote control unit or on the TV.
Press MENU and the MENU screen displays.
2
Press c / d to select "Option".
3
Press a / b to select "HDMI Setup", and then
4
press ENTER.
• The HDMI Setup can be selected only when
"INPUT4" or "INPUT5" is selected.
[ Option ... HDMI Setup ]
MENU
Option
Audio Only
DNR
Input Select
Blue Screen
Colour System
Power Control

HDMI Setup

PC Setup

Press a / b to select the desired item or
5
setting, and then press ENTER.
HDMI Setup
Selectable
items
items

Signal Type

RGB/
YCbCr4:4:4/
YCbCr4:2:2
Colour
Auto/ITU601/
Matrix
ITU709

Auto View

Enable/Disable
Audio
Digital/Analogue
Select
NOTE
• Refer to your external equipment operation manual for the
signal type.
• When connecting a DVI-HDMI conversion adaptor/cable to
the HDMI terminals, the image may not come in clearly.
Description
Select the video signal type from
the HDMI terminal.
Select the video colour matrix type
when a YCbCr signal is input.
Set whether or not to use WIDE
MODE based on signal recognition,
including an HDMI signal.
Select "Digital" for audio signal
via the HDMI terminal. Select
"Analogue" for audio signal via the
AUDIO jack. (selectable only when
using INPUT4 of the two HDMI
terminals.)

PC Setup

Input Signal (PC input mode only)

• Some input signals may have to be registered manually to
display properly.
• The input signals (resolutions) in the list below are not
distinguishable when received. In such case, you have to
set the correct signal manually. After setting once, it will
display when the same signal (resolution) is input again.
1024 g 768
1280 g 768
NOTE
• You can only select the "Input Signal" on the Setup menu
when receiving one of the 3 input signals listed above.
Press MENU and the MENU screen displays.
1
Press c / d to select "Option".
2
Press a / b to select "PC Setup", and then
3
press ENTER.
Press a / b to select "Input Signal" and then
4
press ENTER.
Press a / b to select the desired input signal
5
on the display.
1024 x 768
1280 x 768
1360 x 768
1360 g 768
(Example)
35