Sharp 21H1-FRU Betriebshandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Betriebshandbuch für TV Sharp 21H1-FRU herunter. Sharp 21H1-FRU 28 Seiten.

Connections

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of

the types of connections that are used for coaxial and feeder cables.

You can also connect the TV set to the tuner on a VCR using the connection shown below.

VCR

To antenna in

terminal

• When using the RF terminal connection, set the TV to channel zero to make initial adjustments for the VCR.

• Turn off the power on the TV set and the VCR being connected before making the above connections.

Be sure the cord plugs are fully inserted in the connection terminals.

• See the operation manual of your VCR for connection details.

If your outdoor antenna uses a 75-ohm coaxial cable with a standard

DIN45325 plug (IEC 169-2), plug it into the antenna jack at the rear of

the set.

If your outdoor antenna uses a 300-ohm twin-lead flat feeder, connect a

300-ohm to 75-ohm impedance converter and plug it into the antenna

jack at the rear of the set.

Standard DIN45325 plug (IEC169-2)

75-ohm coaxial cable (round cable) (not supplied)

300-ohm twin-lead

75-ohm impedance

flat feeder

converter

(not supplied)

To RF out

terminal

Antenna in

E 22