Crestron SPKA-FMKT-IC8-SQ Schnellstart

Blättern Sie online oder laden Sie pdf Schnellstart für Racks & Ständer Crestron SPKA-FMKT-IC8-SQ herunter. Crestron SPKA-FMKT-IC8-SQ 4 Seiten. Flush mount kit for 6 in. or 8 in. reference and ultimate in-ceiling speakers, 1 pair

Seite drucken

SPKA-FMKT-IC6/IC8 and SPKA-FMKT-IC6/IC8-SQ

Flush Mount Kit for 6 in. or 8 in. Reference and Ultimate In-Ceiling Speakers, 1 Pair

The flush mount kit accessory for Crestron speakers made by Origin

Acoustics is compatible with the following Reference and Ultimate

speakers:

REFERENCE IC6-W-T-EACH

REFERENCE IC8-W-T-EACH

ULTIMATE IC6-AW-W-T-EACH

ULTIMATE IC6-W-T-EACH

ULTIMATE ICS8-AW-W-T-EACH

ULTIMATE IC8-AW-W-T-EACH

These kits allow for in-ceiling speakers to be mounted so the room-side

surface of the speaker grille is flush with the drywall surface.

The flush mount kits are available in square (SQ) and circular shapes.

In the Box

SPKA-FMKT-IC6/IC8

SPKA-FMKT-IC6/IC8-SQ

Installation

Prepare the Mounting Hole

Before finalizing the speaker location, check to make sure there are no

fixtures, pipes, air ducts, joists, or other possible obstructions. If

applicable, use a good quality stud finder to locate joists.

To identify obstructions, do the following:

Use a drywall saw to cut a small hole at a 45° angle. An angle cut

simplifies repair since the removed piece can be reinserted to help

plug the hole.

Use a piece of stiff cable, bent into an L shape, with one end long

enough to explore an area equal to the size of the speaker. Insert the

cable into the hole, make sure it rotates freely in a complete circle

and that there is sufficient depth.

If there are no obstructions, use the supplied template to trace an

outline of the mounting hole on the ceiling. Cut the final mounting hole

at a 90° angle to the ceiling.

Quick Start