DIGISYSTEM PS-600T Gebrauchsanweisung - Seite 2

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Laborausrüstung DIGISYSTEM PS-600T herunter. DIGISYSTEM PS-600T 2 Seiten. Pipette shaker

Seite drucken
DIGISYSTEM PS-600T Gebrauchsanweisung
Circuit Diagram
Caution:
Always disconnect the power cord before troubleshooting.
Trouble
Instrument inoperative.
Holder doesn't shake.
Power indicator can not light
up.
Timer is not accurate
DIGISYSTEM LABORATORY INSTRUMENTS INC.
Troubleshooting Guide
Cause
Power cord not connected to outlet.
Dead power output.
Power is not on.
Belt is broken
Motor is broken.
The power indicator is broken.
Timer is not set by the correct procedures.
Timer is broken.
Plug in the power cord.
Change to different output.
Place the switch at 'Timer' or 'ON' position.
Contact your distributor for repair.
Contact your distributor for repair.
Contact your distributor for repair.
Read the operation manual and set it again.
Contact your distributor for repair.
www.digisystemlab.com
Remedy
REV.1-2017