Sharp SX-51A7 Betriebshandbuch - Seite 7
Blättern Sie online oder laden Sie pdf Betriebshandbuch für TV Sharp SX-51A7 herunter. Sharp SX-51A7 24 Seiten. Optional teletext facility, teletext model
Seite druckenVCHA
0
4 Channel Selection "
V CH
A"
99
The channel
number
is displayed
on the
screen when the Channel
selector Up (A)
button or Down (V) button is pressed on the
I
I
set or on the remote control.
When the Channel (A) button is pressed, the
channel
number
will change
as follows:
AiS&&
1.2.3...38.39.1.2...
Each time the Channel (V)
button is pressed, the channel
number will
AA&&
change as follows: 39.38.37 . . . . 2.1.39.38 . . . . .
Channel
lSA6z5
The
Channel
selector
buttons
on the
remote
control
can also be pressed
to
select
V
CH A
buttons
A
&I
directly select the desired
channel.
If the
factory preset
channel
frequencies
do not
&
match your local channel frequencies,
refer
to Presetting
the Channels.
_------------_--___------------------~~
Channel Selection Using the Infrared Remote Control
Channel to be selected
Channel selector button to be pressed.
Channel 1 - 9
Press the & - & buttons.
Channel 10 - 19
Press the &
button ("l-"
displayed for about 6 seconds), and
then the&
- & button.
Note: Be
sure
to press the buttons within 5 seconds after the
& button is pressed. because the &
button is
cancelled in about 6 seconds.
Channel 20 - 29
Press the
'O' button ('12-" displayed for about 6 seconds), and
then the&e&
button.
Note: Refer to the note for Channel 10 - 19.
Channel 30 - 39
Press the &
button ("3-" displayed for about 6 seconds on the
screen), and then the ,$-A
button.
Note: Refer to the note for Channel 10 - 19.
Notes:
11) The selected channel number will appear on the screen for about 3 seconds before it
disappears
and the TV screen returns to its normal state.
12) When the Channel selector (A)
or
(V)
button on the TV
set or on the remote control
is held down, the channel number changes once per second. Release the Channel (A)
or (Vj button
when the desired channel number appears on the screen.
1.
SKIP
FINE PRESET P-MODE
@
- @
Presetting the Channels
oop
(AUTO SEARCH TUNING SYSTEM)
Note: Most channels are preset at the factory.
CALL
To avoid unnecessary
resetting,
check the
(ON SCREEN)
tuning
of all channels before resetting them.
1
1. Press the Preset
button behind the door
VHF-L 111..
. . . . . . . . .
"1
1
T
and the band, VHF or UHF, that you wish to
M mory TV
preset. Press the button
once for the VHF
band. Press again for the UHF band. Press
station
again when you have finished
presetting the
Band lndicato
(VHF-L, VHF-H, UHF)
Channel
channel.
(VHF-L
l-5,
VHF-H
5a-11, UHF
Number
28-69).