Sharp SX76NF100 Betriebshandbuch - Seite 20

Blättern Sie online oder laden Sie pdf Betriebshandbuch für TV Sharp SX76NF100 herunter. Sharp SX76NF100 44 Seiten. Colour television

Seite drucken
Settings and adjustments
CH
CH
MENU
• Switching COLOUR system:
Set the system to "AUTO" for normal TV reception. The AUTO mode automatically detects the received
signal system and changes the reception system of the TV set. When the picture is not stable, switching
to an appropriate system may improve the picture quality.
• In a weak reception area, or under bad reception conditions, you can change the frequency by Fine
Tuning.
• When using Fine Tuning (FINE), the channel number changes from green to yellow.
• To return the channel to its original frequency setting, follow the manual channel tuning procedure. See
.
18
20

Channel setting

Enables individual channel setting.
1
Press
MENU
screen.
2
Press
CH
select "CH-SETTING".
3
Press
display CH-SETTING menu.
4
Press
CH
select desired item.
5
Each time you press
individual items changes as follows:
• POSITION:
The channel position changes to the next higher or lower number.
AUTO
• COLOUR:
B/G
• SOUND:
• SKIP: ON
OFF
Channel numbers with a " " mark on the left are set to SKIP. To turn
off SKIP, press the number buttons to select the desired channel and
then set SKIP to "OFF".
• FINE: The frequency changes to allow fine tuning.
• NICAM: ON
Select "ON" to receive NICAM stereo or bilingual sound signals. (See
33
for sound mode selection.) Select "OFF" to receive NICAM
mono signals.
• A2: ON
OFF
Select "ON" to receive A2 stereo or bilingual sound signals. (See
34
for sound mode selection.) Select "OFF" to receive mono
signals.
6
Press
MENU
screen appears.
• When you select AV1, AV2 or AV3 for the channel position, the CH-
SETTING menu changes as shown above and the colour mode
changes in the following order:
AUTO
PAL
Page 20
MENU
to call MENU
P I CTURE
SOUND
FEATURE
T I MER
/
to
CH–SETT I NG
CH
CH–SETT
I NG
/
to
POS I T I O
N
COLOUR
SOUND
SK I P
/
to
F I NE
CH
N I CA
M
A2
/
PAL
SECAM
N443
I
D/K
M
OFF
CH–SETT
I NG
until normal
POS I T I O
N
COLOUR
SECAM
N443
N358
03.7.30, 9:01 AM
CH 7
2
A
UTO
B G
OFF
1
68 . 25MHz
ON
ON
, setting for
N358
AV
1
AUTO