Sharp CD-BA300 Betriebshandbuch - Seite 25

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Stereo System Sharp CD-BA300 herunter. Sharp CD-BA300 32 Seiten. Cdba300 operation manual
Auch für Sharp CD-BA300: Kurzanleitung (4 seiten)

Sharp CD-BA300 Betriebshandbuch

Dubbing from Tape to Tape

*BA300_P23_25
25
You can record from TAPE 1 to TAPE 2.
For recording use only normal tape. Do not use metal and CrO
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette into the TAPE 1 cassette compart-
ment. Insert a blank tape into the TAPE 2 cassette compartment.
It is recommended that the recording tape be the same length as the master
tape.
3
Press the TAPE (1 V
V V 2) button until "TAPE 1" appears in the
V V
display.
4
Press the REC PAUSE I6
I6 (I6
I6) button.
I6
I6
I6
I6
I6
I6
Recording will be paused.
5
Press the 0 0 0 0 0 / R R R R R button on the main unit or the TAPE 2 0 0 0 0 0 button
on the remote control to start dubbing.
To stop dubbing:
Press the
(TAPE ) button.
TAPE 1 and TAPE 2 will simultaneously stop.
Erasing recorded tapes
1. Load the tape to be erased into the TAPE 2 cassette compartment.
2. Press the TAPE (1 V 2) button until "TAPE 2" appears in the display.
3. Press the REC PAUSE I6 (I6) button.
4. Press the 0 / R button on the main unit or the TAPE 2 0 button on the remote
control to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
00.11.16, 2:53 PM
tapes.
2
25