Sharp CD-E250E Betriebshandbuch - Seite 23

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Stereo System Sharp CD-E250E herunter. Sharp CD-E250E 32 Seiten. Mini component system
Auch für Sharp CD-E250E: Betriebshandbuch (32 seiten)

Seite drucken
Sharp CD-E250E Betriebshandbuch
To perform programmed recording:
1 Programme discs and tracks. (See page 18.)
2 Press the REC PAUSE (TAPE-2
3 Press the
To interrupt recording:
Press the REC PAUSE (TAPE-2
! Recording is paused, but CD playback will continue.
To resume recording, press the
To stop recording:
Press the
The CD and tape will stop.
Note:
Whilst recording, OPEN/CLOSE
mended to perform CD recording after closing the disc tray.
" Recording from the radio
1
2
3
4
To interrupt recording:
Press the REC PAUSE (TAPE-2
To resume recording, press the
To stop recording:
Press the
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
Downloaded From Disc-Player.com Sharp Manuals
) button.
/
button.
) button.
/
button.
button.
button is deactivated. It is recom-
Tune in to the desired station. (See page 19.)
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
Press the
/
button to start recording.
) button.
/
button.
button.
" Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape
into the TAPE 2 cassette com-
partment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1
2) button until "TAPE 1" appears on
the display.
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the
/
button to start dubbing.
To stop dubbing:
Press the
button.
TAPE 1 and TAPE 2 will simultaneously stop.

" Erasing recorded tapes

1 Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing toward you.
2 Press the TAPE (1
2) button until "TAPE 2" appears on the dis-
play.
3 Press the REC PAUSE (TAPE-2
) button.
4 Press the
/
button to start erasing.
Note:
Make sure that the TAPE 1 is not in use.
03/2/17
CD-E250E(E)3.fm
CD-E250E
23