Sharp CD-SW340 Betriebshandbuch - Seite 32
Blättern Sie online oder laden Sie pdf Betriebshandbuch für Stereo System Sharp CD-SW340 herunter. Sharp CD-SW340 40 Seiten. Mini component system
Seite drucken
Timer and sleep operation (Remote control only) (continued)
CD-SW340
Timer playback or timer recording
Before setting timer:
1 Check that the clock is set to the correct time (refer to page 16).
If it is not set, you cannot use the timer function.
2 For timer playback:
For timer recording:
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CLOCK/TIMER button.
3
Within 10 seconds, press the
"ONCE" or "DAILY", and press the MEMORY button.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
4
Within 10 seconds, press the
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
32
Load a cassette or discs to be played.
Load a cassette for recording in the
cassette compartment.
or
button to select
or
5
Press the
"REC", and press the MEMORY button.
The illustrations show the daily timer setting.
6
Press the
then press the MEMORY button.
The illustrations show the timer playback setting in the daily
timer mode.
7
Press the
then press the MEMORY button.
8
Set the time to finish as in steps 6 and 7 above.
9
Switch input with the
press the MEMORY button.
To select the timer playback source: CD, TUNER, TAPE 1 or
TAPE 2.
To select the timer recording source: TUNER.
When you select the tuner, select a station by pressing the
or
button.
button to
If a station has not been programmed, "NO PRESET" will
be displayed and timer setting will be canceled.
or
button to select "PLAY" or
White
or
button to adjust the hour and
or
button to adjust the minutes and
or
button, and then
button, and then press the MEMORY
Red