Sharp XL-S10 Betriebshandbuch - Seite 22

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Stereo System Sharp XL-S10 herunter. Sharp XL-S10 31 Seiten. Sharp deck operation manual xl-s10
Auch für Sharp XL-S10: Service-Handbuch (44 seiten)

Seite drucken

Recording to a cassette tape (continued)

XL-S10

" Recording from the radio

Tune in to the desired station (see page 18).

Load a cassette into the cassette compartment with the

side to be recorded on facing you.

Wind past the leader of the tape, on which recording cannot be

performed.

Press the

button.

Press the

button, which also en-

gages the

button.

Press the

button again to begin recording.

To stop recording:

Press the

button.

Note:

If you hear a whistling noise while recording an AM station, move

the AM loop antenna.

" Erasing a recorded tape

1. Load the tape to be erased into the cassette compartment with

the side to be erased facing toward you.

2. Press the FUNCTION button until "TAPE" appears on the dis-

play.

3. Press the

button which also engages the

erasing.

Erase-prevention tabs of cassette tapes:

! When recording on a cassette

tape, make sure that the erase-

prevention tabs are not re-

moved. Cassettes have remov-

able tabs that prevent

accidental recording or erasing.

! To protect the recorded sound,

remove the tab after recording.

Cover the tab hole with the ad-

hesive tape to record on the

tape without the tab.

button to begin

Side A

Tab for side B Tab for side A