Sharp XL-UR2110H Betriebshandbuch - Seite 41

Blättern Sie online oder laden Sie pdf Betriebshandbuch für Stereo System Sharp XL-UR2110H herunter. Sharp XL-UR2110H 44 Seiten.

Seite drucken

Remote control

Symptom

The remote

Is the AC power lead of the unit plugged in?

control does not

Is the battery polarity correct?

operate.

Are the batteries dead?

Is the distance or angle incorrect?

Does the remote control sensor receive

strong light?

Tuner

Symptom

The radio

Is the unit placed near the TV or computer?

makes unusual

Is the FM aerial or AM loop aerial placed

noises continu-

properly? Move the aerial away from the

ously.

AC power lead if it's located nearby.

USB

Symptom

Device cannot

Is there any MP3/WMA file available?

be detected.

Is the device properly connected?

Is it MTP device?

Does the device contain AAC file only?

Playback does

Is it the copyright protected WMA file?

not start.

Is it the false MP3 file?

Wrong time

Is Variable Bitrate file being played back?

display.

Is the File Name written in Chinese or

Wrong file name

Japanese characters?

display.

Recording

Is the USB device in write protect mode?

cannot start.

Is it a CD-WMA disc?

Is the device's memory already full?

Possible cause

Condensation

Sudden temperature changes, storage or operation in an extremely

humid environment may cause condensation inside the cabinet (CD

pickup, etc.) or on the transmitter on the remote control.

Condensation can cause the unit to malfunction. If this happens,

leave the power on with no disc in the unit until normal playback is

possible (about 1 hour). Wipe off any condensation on the transmitter

with a soft cloth before operating the unit.

If trouble occurs

When this product is subjected to strong external interference

(mechanical shock, excessive static electricity, abnormal supply

voltage due to lightning, etc.) or if it is operated incorrectly, it may

malfunction.

If such problem occurs, do the following:

1 Set the unit to the stand-by mode and turn the power on again.

2 If the unit is not restored in the previous operation, unplug and

plug in the unit again, and then turn the power on.

Note:

If neither operation above restores the unit, clear all the memory by

resetting it.

Factory Reset, Clearing All Memory

1 Press the ON/STAND-BY button to enter the power stand-by

mode.

2 Whilst pressing down the

the ON/STAND-BY button until "CLEAR ALL" appears.

ON/

STAND-BY

Caution:

This operation will erase all data stored in memory including clock,

timer settings, tuner preset, and CD programme.

1 button and the

5 button, press

XL-UR250H(BK)

XL-UR2110H(BK)