Sharp AR-M205 Software-Setup-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Software-Setup-Handbuch für Alles in einem Drucker Sharp AR-M205 herunter. Sharp AR-M205 20 Seiten. Digital multifunctional system
Auch für Sharp AR-M205: Online-Handbuch (33 seiten)

Seite drucken

CONNECTING A PARALLEL CABLE

Ensure that your computer and the

machine are turned off.

Plug the cable into the parallel port on

the machine, and fasten with the clasps.

CONFIGURING THE PRINTER DRIVER

After installing the MFP driver (printer driver), you must configure the printer driver settings appropriately for the

number of paper trays on the machine and the size of paper loaded in each.

Click the "start" button, click "Control

Panel", click "Printers and Other Hardware",

and then click "Printers and Faxes".

In operating systems other than Windows XP, click the

"Start" button, select "Settings", and then click "Printers".

Click the "SHARP AR-XXXX" printer

driver icon and select "Properties"

from the "File" menu.

If you are using Windows NT 4.0/2000/XP, go to step 4.

In Windows 95/98/Me, click the "Setup" tab.

Click the "Configuration" tab and set

the printer configuration based on the

options that have been installed.

Set the printer configuration properly. If not,

printing may not take place correctly.

CONNECTING TO A COMPUTER

Plug the other end of the cable into

your computer's parallel port.

Click the "Set Tray Status" button and

select the size of paper that is loaded

in each tray.

Select a tray in the "Paper source" menu, and

select the size of paper loaded in that tray from the

"Setting Paper Size" menu. Repeat for each tray.

If the dual function board is not installed, be sure

Caution

to configure the above "Set Tray Status"

settings, and then when printing specify a tray

other than "Auto Select" in "Paper Source" in the

"Paper" tab of the printer driver setup screen.

Click the "OK" button in the "Set Tray

Status" window.

Click the "OK" button in the printer

properties window.