Sharp AR-M276 Handbuch für den Schlüsselbetrieb - Seite 4
Blättern Sie online oder laden Sie pdf Handbuch für den Schlüsselbetrieb für Alles in einem Drucker Sharp AR-M276 herunter. Sharp AR-M276 24 Seiten. Digital multifunctional system
Auch für Sharp AR-M276: Software-Setup-Handbuch (18 seiten), Software-Setup-Handbuch (20 seiten), Spezifikationen (9 seiten)
Seite drucken
USING THE KEY OPERATOR PROGRAMS
When using the key operator programs for the first time, change the factory default key operator code to a new
Note
code. (Step 3 to step 5)
1
Press the [CUSTOM SETTINGS] key.
LINE
DATA
CUSTOM SETTINGS
B STATUS
2
Touch the [KEY OPERATOR
PROGRAMS] key.
CUSTOM SETTINGS
DISPLAY
TOTAL COUNT
CONTRAST
ADDRESS
TRAY SETTINGS
CONTROL
KEYBOARD
KEY OPERATOR PROGRAMS
SELECT
3
Use the numeric keys to enter the
five-digit key operater code.
KEY OPERATOR CODE
4
Touch a key to select the desired
category of key operator programs.
KEY OPERATOR PROGRAMS
ACCOUNT
ENERGY SAVE
CONTROL
COPY SETTINGS
PRINT SETTINGS
KEY OPERATOR
LIST PRINT
CODE CHANGE
Example:
To change the key operator code, touch the [KEY
OPERATOR CODE CHANGE] key.
• Each time you need to configure a program, use this
procedure to select the program.
• In the following steps, the setting screen for the
selected program appears. Refer to the explanation
of the program to select the desired setting (the
explanations of the programs begin on page 8).
2
EXIT
LIST PRINT
CLOCK
FAX DATA
RECEIVE MODE
FORWARD
Each time a digit is
entered, the dash (-) that
indicates the digit will
change to an asterisk ( ).
The factory default setting
for the key operator code
is 00000.
EXIT
OPERATION
DEVICE CONTROL
SETTINGS
SCANNER
FAX SETTINGS
SETTINGS
PRODUCT KEY
5
Use the numeric keys to enter the new
5-digit key operator code.
00000
-----
be used). The entered number will be the new key
operator code. Be sure to remember this number.
6
Touch the [OK] key. You will return to
the screen of step 4.
OK
7
Press the [CLEAR ALL] key (
exit the program.
Use a number for the key
operator code that has not
been programmed as an
account number for
auditing mode (a number
that has been
programmed as an
account number cannot
This completes the
procedure for changing
the key operator code. If
you wish to configure
another program, touch
the key of the desired
program in the screen of
step 4.
) to