Sharp BP-20M31 Schnellstart-Handbuch - Seite 17

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Alles in einem Drucker Sharp BP-20M31 herunter. Sharp BP-20M31 36 Seiten.

LOADING PAPER

NAMES AND LOCATIONS OF TRAYS

The names of the trays are as follows.

(2)

(3)

Setting orientation of the print side

The setting orientation varies for the print side of paper, depending on the tray used. For "Letter Head" and

"Pre-Printed", set the paper in the reverse orientation.

Place with the print side facing the direction indicated below.

Tray

Trays 1 - 4

Bypass tray

LOAD PAPER INTO THE TRAY 1

BEFORE USING THE MACHINE

(1)

(2)

(3)

(4)

(1)

(5)

(4)

(5)

In normal status

Facing up

Facing down

Pull out the paper tray.

Gently pull the tray out until it stops.

Push the centre of the pressure plate down until it locks into

place.

Adjust guide plates A and B to match

the longitudinal and transversal

dimensions of the paper to be loaded.

The guide plates A and B are slidable. Squeeze the

separator plate lever and slide to the desired paper size.

Bypass tray

Tray 1

Tray 2 (when a 500-sheet paper feed tray is installed)

Tray 3 (when a stand/2x500 sheet paper drawer is

installed)

Tray 4 (when a stand/2x500 sheet paper drawer is

installed)

With letter head or pre-printed paper set

Facing down

Facing up