Sharp MX-2310U Start Handbuch - Seite 12

Blättern Sie online oder laden Sie pdf Start Handbuch für Alles in einem Drucker Sharp MX-2310U herunter. Sharp MX-2310U 28 Seiten. Digital full color multifunctional system
Auch für Sharp MX-2310U: Software-Setup-Handbuch (46 seiten), Start Handbuch (24 seiten), Start Handbuch (24 seiten), Betriebshandbuch (19 seiten), Spezifikationsblatt (2 seiten), Broschüre & Specs (13 seiten), Service-Handbuch (20 seiten)

Sharp MX-2310U Start Handbuch

TURNING THE POWER ON AND OFF

This machine has two power switches. The main power switch is at the bottom left after the front cover is opened. The other power switch is the [POWER] key (
the operation panel.
Turning on the power
(1) Switch the main power switch to the "
(2) Press the [POWER] key (
Turning off the power
(1) Press the [POWER] key (
(2) Switch the main power switch to the "
• When turning off the power, make sure that the indicator lights on the operation panel turn off as well.
• In the event of a power failure or other reason that causes the machine to suddenly turn off, turn back on the power of the machine and
then proceed to turn off the machine following the correct procedures.
Switching off the main power switch or removing the power cord from the outlet while any of the indicators are lit or blinking may
damage the hard drive and cause data to be lost.
• Switch off both the [POWER] key (
is a bad thunderstorm nearby, or when you are moving the machine.
When using the fax or Internet fax function, always keep the main power switch in the "on" position.
„ Restarting the machine
In order for some settings to take effect, the machine must be restarted.
If a message in the touch panel prompts you to restart the machine, press the [POWER] key (
In some states of the machine, pressing the [POWER] key (
" position.
) to turn on the power.
) to turn off the power.
" position.
) and the main power switch and unplug the power cord if you suspect a machine failure, if there
) to restart will not make the settings take effect. In this case, use the main power switch to switch the power off and then on.
When the main power
switch is switched on, the
main power indicator on the
operation panel lights up.
) to turn off the power and then press the key again to turn the power back on.
) on
Main power
indicator
Main power
[POWER] key
switch
12