Punch module
Punch module (MX-PN11B) for finisher
Name
11" × 17" (A3) to 7-1/4" × 10-1/2"R (A4)
Paper size for punch module
Cannot punch special types of paper such as OHP.
Holes
3 holes
Fax Specifications
Name
Facsimile expansion kit (MX-FX11)
Useable lines
General phone lines (PSTN), automated branch exchange (PBX)
Normal characters:
Small characters:
Scanning line density
Fine characters:
High-definition:
Super G3: 33.6 kbps, G3: 14.4 kbps
Connection speed
MH, MR, MMR, JBIG
Coding method
Connection mode
Super G3 / G3
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5) (Paper with a max. length of
1,000 mm* can be transmitted (one-sided and B/W only).)
Original paper sizes for transmission
* Internet fax (optional) is up to 800 mm (at 600 x 600 dpi).
8 dot/mm × 3.85 chars/mm
8 dot/mm × 7.7 line/mm
8 dot/mm × 15.4 line/mm
16 dot/mm × 15.4 line/mm
Supplied from finisher
Required power supply
Approx. 7 lbs. (3 kg)
Weight
3-55/64" (W) × 18-50/64" (D) × 5-26/64" (H)
Dimensions
(98 mm (W) × 477 mm (D) × 137 mm (H))
Registered paper size
11" × 17" (A3) to 5-1/2" × 8-1/2" (A5)
Approx. 2 seconds *1 (8-1/2" × 11" (A4) Sharp standard paper, normal
Transmission time
characters, Super G3 (JBIG))
Memory
1GB
Touch dial memory
Notes
Group dial
Mass transmissions
*1
Complies with the 33.6 kbps transmission method for Super G3 facsimiles standardized by the
International Telecommunications Union (ITU-T). This is the speed for when sending an 8-1/2" × 11" (A4)
size piece of paper of around 700 characters at standard image quality (8 × 3.85 chars/mm) in Hi-speed
mode (33.6 kbps). This is the transmission speed for image information only and does not include time for
transmission control. The actual time needed for a transmission depends on the content of the text, type
of receiving fax machine, and telephone line conditions.
Max. of 1,000 entries (Including group dialing
for fax, scanner, and Internet fax)
Max. of 500 entries
Max. of 500 recipients
17
Seite drucken