Sharp MX-M453 Software-Setup-Handbuch - Seite 32

Blättern Sie online oder laden Sie pdf Software-Setup-Handbuch für Alles in einem Drucker Sharp MX-M453 herunter. Sharp MX-M453 48 Seiten. Digital multifunctional system
Auch für Sharp MX-M453: Sicherheitshandbuch (32 seiten), Broschüre & Specs (12 seiten)

Seite drucken

Select [SC2 TCP/IP Port] and then click

the [New Port] button.

In Windows 98/Me, select [Other], [SC2 TCP/IP Port],

and then click the [OK] button.

• The "SC2 TCP/IP Port" is added when the printer

driver is installed using a "Standard installation", or

a "Custom installation" with "LPR Direct Print

(Specify Address/Auto Search)" selected.

• If the printer driver is installed using a "Custom

installation" with "IPP" selected, the [SC-Print2005

Port] is added. If you need to change the printer port

when the machine is connected to an intranet or a

wide area network (WAN) using the IPP function,

select [SC-Print2005 Port], click the [New Port]

button (the [OK] button in Windows 98/Me), and

follow the on-screen instructions to create the port

again.

Create the new port.

(1) (2)

(3)

(1) Enter the machine's IP address.

☞

Checking the IP address of the machine

(page 7)

(2) Make sure that [LPR] is selected.

(3) Make sure that [lp] is entered.

(4) Click the [OK] button.

Click the [Close] button in the screen of

step 4.

In Windows 98/Me, this step is not required. Go to the

next step.

Make sure the created printer port is

selected in the printer properties

window and then click the [Apply]

button.

(4)