Digital Acoustics IP7 Desktop Referenzhandbuch - Seite 9

Blättern Sie online oder laden Sie pdf Referenzhandbuch für Intercom System Digital Acoustics IP7 Desktop herunter. Digital Acoustics IP7 Desktop 14 Seiten.

Seite drucken

Connecting to an Ethernet Network

The Ethernet 10/100 connector allows the unit to be attached to a
standard Ethernet 10/100 network.
• Plug a Cat5 cable into the RJ-45 connector labeled Ethernet
10/100 and connect the other end to a 10/100 switch
• The Ethernet 10/100 connector supports auto "MDIX" and can
be plugged directly into a PC for diagnostic purposes

Connecting Power

External Power

• The 2.1mm Power Jack (center tip positive) accepts 9VDC

PoE

Plug a Cat5 cable from an 802.3af compliant switch or injector into the
Ethernet 10/100 connector. 7 watts will be requested from PoE
(802.3af compatible) Power Source Equipment (PSE).

Connecting Mic In or Audio Out

Mic In

• The 3.5mm Mic In jack accepts a standard electret or dynamic
mic. Use of this jack overrides the integrated mic
• Mono Jack required

Audio Out

• The 3.5mm Audio Out Jack is capable of driving headphones or
an external amplifier. Use of this jack overrides the integrated
speaker
• Mono Jack required

Setting Volume Levels

The IP7 Desktop supports seven volume levels for the internal speaker.
• Press the "Volume Up" or "Volume Down" button one time to
increase or decrease the speaker volume
• Pressing the "Volume Up" or "Volume Down " button seven times
sets the unit at its highest or lowest setting
• Refer to the software manuals for setting the volume via
software
Page 6 of 6