FiberLabs EDFA-1550 Series Technischer Reisepass - Seite 16

Blättern Sie online oder laden Sie pdf Technischer Reisepass für Verstärken FiberLabs EDFA-1550 Series herunter. FiberLabs EDFA-1550 Series 20 Seiten. 1550nm optical amplifier

Seite drucken

Technical passport / EDFA-1550

You can also use the "help" command to show help information of other commands, such as "help

ethcfg"，ethcfg's help information appears as follows:

ethcfg

This command configures the Ethernet parameters, including IP address, subnet mask and gateway. You

can refer to the help information for its using.

settrap

This command shows or modifies the aim host IP address list of the SNMP Trap,

settrap –l display command, settrap –m modify command; as follows:

IP address of 0.0.0.0 and 255.255.255.255 don't exist. SNMP Trap does not send to these two addresses.

community

This command configures the read-only group name and read-write group name. "Group name" is the

concept of SNMP agreement like the password. Use the command "community ro" to configure the read-

only, and "community rw" for the read-write. For example, input "community rw public", "public" is the

read-write group name. The group name for read-only and read-write are both "public" as the equipment

default setting from factory.

6.4 WEB Network Management

Opening the IE browser and entering the equipment IP address leads to the following interface:

12-2016-v4