Sharp Notevision PG-D40W3D Setup-Handbuch - Seite 30

Blättern Sie online oder laden Sie pdf Setup-Handbuch für Projektor Sharp Notevision PG-D40W3D herunter. Sharp Notevision PG-D40W3D 35 Seiten. True xga/wxga data projectors
Auch für Sharp Notevision PG-D40W3D: Benutzerhandbuch (2 seiten), Spezifikationsblatt (2 seiten), Spezifikationen (2 seiten), Broschüre & Specs (2 seiten)

Seite drucken

Sharp Notevision PG-D40W3D Setup-Handbuch

Setting up the Projector Using RS-232C or Telnet

Setting of Search Port

(ADVANCED[0]Search Port)

Sets the port number used when searching

for the projector from the network.

advanced>0

Please Enter Port Number for Search from Computer.

Valid range

: 1025 to 65535

Search Port

: 5006

Please Enter

: 5004

(change)

—>

5004

1 Enter "0" and press the "Enter" key.

2 Enter numerical value and press the

"Enter" key.

Display set numerical value (*).

Note

•

Set according to need. Normally, use with the

factory default setting.

Return to Default Settings

(ADVANCED[!]Restore Default

Setting)

Returns all menu setting values to the default

state.

advanced>!

Restore All Setting to Default(y/n)? y

— User Setting Initialized —

1 Enter "!" and press the "Enter" key.

2 Enter "y" and press the "Enter" key.

Note

•

If the values for IP Address, Subnet Mask or

Gateway of the projector have been returned to

the default settings via Telnet, the computer

cannot be connected to the projector

depending on the computer's network settings.

-30

Return to Main Menu

(ADVANCED[Q]Return to Main

Menu)

Returns to the main SETUP MENU.

advanced>q

----------------------------SETUP MENU---------------------------

[1]IP Address

[4]User Name

[6]RS-232C Baud Rate [7]Projector Name [8]DHCP Client

[A]Advanced Setup

[V]View All Setting

setup>

1 Enter "q" and press the "Enter" key.

Returns to the SETUP MENU.

[2]Subnet Mask

[3]Default Gateway

[5]Password

[D]Disconnect All

[S]Save & Quit

[Q]Quit Unchanged