Sharp PG-M10SE Service-Handbuch - Seite 13

Blättern Sie online oder laden Sie pdf Service-Handbuch für Projektor Sharp PG-M10SE herunter. Sharp PG-M10SE 31 Seiten. Digital multimedia projector
Auch für Sharp PG-M10SE: Betriebshandbuch (49 seiten)

Seite drucken

11)Projection lens (See Fig. 11.)

Remove the three screws (S-7) shown in Fig. 11,

and detach the projection lens.

Note: When reassembling, be careful not to damage

the spherical mirror inside of the lens base.

S-7

Projection lens

S-7

Fig. 11

12)Color wheel (See Figs. 12 and 13.)

Remove the two screws (S-9) shown in Fig. 12, and

detach the color wheel from the lens base.

Remove the two screws (S-4) shown in Fig. 13, and

detach the wheel cover from the color wheel.

Remove the wheel screw shown in Fig. 13, and

detach the wheel sensor.

Note: When reassembling, be careful not to tighten

the screws too much. Otherwise the color wheel

mat come in contact with other components

nearby and fail to rotate. Readjustment will be

needed if the color wheel and the wheel sensor

have been replaced. (Refer to page __.)

Color wheel

S-9

Fig. 12

S-9

Fig. 13

13)Light tunnel and aperture (See Fig. 14.)

Remove the three screws (S-7) shown in Fig. 14,

and detach the light tunnel from the lens base.

Remove the two screws (S-4) shown in Fig. 14, and

detach the aperture from the lens base.

Note: Do not disassemble the light tunnel.

Light Tunnel

Aperture

S-4

Fig. 14

PG-M10SU/SE

PG-M10XU/XE

Wheel Cover

Wheel Sensor

S-4

S-7