Sharp PG-M20 Series Schnellstart-Referenzblatt - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Referenzblatt für Projektor Sharp PG-M20 Series herunter. Sharp PG-M20 Series 5 Seiten.

SmartPanel Projector Driver Application Note

II. CONTROL WIRING

PROJECTOR CONTROL

RS232

This section specifies how IR-Emitter should be wired to

the Sharp projector.

A. The IR Emitter should be connected to the one of the

IR/SERIAL

Sharp IR windows as follows:

1. Wire the Panel to a female 1/8" Mini as show; wire

IR/SER to tip and GND to ring. Splicing and direct

wiring to the IR Emitter is not recommended as it

makes removal of the Panel for service more difficult.

2. Connect the included IR Emitter to the female mini.

3. Affix the IR Emitter to one of the IR windows on the

projector.

1/8" Mini

Female

Note that the emitter glows red when IR is emitted so wiring

can be verified.

Additional Projector Settings:

There are settings on the Sharp PG-M20x projector that will

affect how the SmartPanel will work. In order to receive the

best performance, set the following options to OFF in the

projectors menu screens.

Press the MENU button either using the SmartPanel hidden

functions or the Sharp remote control. Then change the

following settings.

1. In the Options menu screen turn Auto Power Off to OFF

2. In the Options menu screen turn the Power Save to OFF

3. In the Options menu screen turn the Auto Search to OFF

IR Emitter to

any IR window

Sharp PG-M20x