Digital Alert Systems DASDEC-III Hardware-Installationshandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Sicherheitssystem Digital Alert Systems DASDEC-III herunter. Digital Alert Systems DASDEC-III 16 Seiten.
Seite drucken
Digital Alert Systems
Getting Started – What's needed:
•
A PC, laptop, or tablet and an RJ45 networking cable.
•
A valid, unused IP address. Speak with your network administrator for a proper IP address.
•
The county names for the areas where the equipment will be installed and/or transmitting.
•
The radio frequencies for your Local Primary 1 (LP1) and Local Primary 2 (LP2). These can be
obtained from the state EAS plan or the State Emergency Communications Coordinator (SECC) for
your state. If applicable, you may also need the frequency for a NOAA radio station.
Revision 1.0
DASDEC-III Hardware/Installation Guide
Page 5 of 16