Crestron 4 Series Schnellstart-Handbuch - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Controller Crestron 4 Series herunter. Crestron 4 Series 6 Seiten. Control processor for zūm lighting control system
Auch für Crestron 4 Series: Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart (5 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Erste Schritte (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (12 seiten)

RMC4

4-Series™ Control System

5. (Optional) Secure the RMC4 to the bracket using the two included

6-32 x 3/8 in. screws as shown in the following illustration.

DIN Rail Mounting

1. Detach the RMC4 from the mounting bracket by pulling the left and

right flanges of the bracket outward to release the tabs that hold the

RMC4 in place.

2. Pull the DIN rail release tab downward using a flat-head screwdriver.

3. Position the DIN rail mounting tabs (located on the rear of the

bracket) over the top edge of the DIN rail.

4. Push the DIN rail release tab upward to lock the mounting bracket

onto the rail.

5. Align the slots on the bottom of the RMC4 with the tabs on the

mounting bracket.

6. Press the RMC4 into the bracket until it snaps into place.

NOTE: Do not use the included screws to secure the bracket to the

bottom of the RMC4 when mounting into a DIN rail, as it will then not be

possible to remove the RMC4 from the DIN rail.

Quick Start