Digital Aquatics ReefKeeper Benutzerhandbuch - Seite 11

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt Digital Aquatics ReefKeeper herunter. Digital Aquatics ReefKeeper 18 Seiten.

Seite drucken

When you enter the menu system by pressing the Down button, the display presents the first two lines of the menu

system. The top line, Setup Channels, will be blinking, indicating that it is the selected item. Pressing the Select button

will take to you the channel setup submenu. Pressing down will highlight the second item on the display, Setup

Wavemaker. Pressing Up will scroll the display down, selecting Set Time. Each of the 5 main submenus and the 2

hotkey menus will be dealt with below.

Feed Mode Hotkey

When you press the Feed Mode hotkey (the Up button, from the normal operating screen), the system will enter Feed

Mode. While in Feed Mode, all sump pumps and powerheads turn off. This prevents food from being swept away during

feedings which causes unnecessary bio load on your system. The length of time that Feed Mode takes is configurable in

the

Feed Duration

section. Feed duration can be set to any amount of time between 1 and 99 minutes, in 1 minute

increments.

Status Hotkey

When you press the Status hotkey (the Select button, from the normal operating screen), the Status screen is displayed.

The status screen looks like the example shown here. It provides you with the

version of software that your ReefKeeper is currently running and the Day/Night

Mode status.

Night Mode

Night mode occurs when all the lights are off based on the configuration of the light channels. During night mode the

powerheads that are configured to be off turn off and the A/B and C cycle times double.

6/28/2005