Shimano Alfine S7000 Series Handbuch für Händler - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch für Händler für Zubehör für Fahrräder Shimano Alfine S7000 Series herunter. Shimano Alfine S7000 Series 47 Seiten.
Seite drucken
- 1. Installation of the Cs-S500 Sprocket with Chain Guard
- 2. Installation of the Shifting Lever
- 3. Installation of the Shifting Cable
- 4. Adjusting the Cassette Joint
- 5. Replacement and Assembly of the Indicator Unit
- 6. For Internal 8-Speed (Oil Maintenance Kit: Y00298010)
- 7. In the Case of 11-Speed Internal Geared Hub (Oil Maintenance Kit: Y13098023)
TO ENSURE SAFETY
• If the chain keeps coming off the sprockets during use, replace the sprockets and the chain.
• If using a chain tensioner, use the special CS-S500 18T or 20T sprocket with chain guard. Do not use any other types of sprockets, otherwise the chain
may come off the sprockets.
< SG-S7001-11 >
• When you perform oil maintenance, use the SG-S700 OIL or TL-S703 maintenance kit.
When you replace the oil, follow the manual for TL-S703. When you replace the seal on the right side, use TL-S704.
If SG-S700 OIL is not used, problems such as an oil leakage and gear shifting malfunction may occur.
< CT-S500 / CT-S510 >
• Clean the chain tensioner periodically and lubricate all moving parts and pulleys.
• If there is a large amount of play in the pulleys and an abnormal amount of noise is generated while riding, replace the pulleys.
• Do not disassemble the pulley unit.
• If the tension applied is too strong, noise may be generated while riding.
• If the chain becomes elongated and excessive looseness occurs, readjust the chain tension.
< CT-S510 >
Applicable hubs
Internal 7-speed / 8-speed
• This product is for single front chainwheels only.
The actual product may differ from the illustration because this manual is intended chiefly to explain the procedures for using
the product.
Applicable sprockets
Applicable fork end width
16 - 23T
Applicable fork end shape
4 - 9 mm
8
Vertical