Shimano CJ-7S40 Dienstanweisungen - Seite 2
Blättern Sie online oder laden Sie pdf Dienstanweisungen für Zubehör für Fahrräder Shimano CJ-7S40 herunter. Shimano CJ-7S40 3 Seiten. Rapidfire lever. brake lever. cassette joint.
Seite drucken
3.
Bring the cable around to the cassette joint pulley, hold so that
the inner cable fixing nut is facing to the outside (toward the fork
end), and then slide the flats part of the inner cable fixing washer
into the gap in the pulley.
Flats part of inner
cable fixing washer
4.
Turn the cable 60 counterclockwise and attach it to the hook.
Hook
Turn the
cable 60
5.
Attach the inner cable to the pulley as shown in the illustration,
pass the inner cable through the slit in the cassette joint bracket,
and then insert the end of the outer casing securely into the
outer casing holder.
Inner cable
Pulley
Bracket
Gap in pulley
Inner cable fixing nut
Cassette joint pulley
Outer casing holder
Slit
1
Pass through
the slit.
2
Insert into the outer
casing holder.
6.
Secure the outer casing to the frame with the outer casing bands.
10 cm
Outer casing bands
Adjusting the cassette joint
1.
Set the Rapidfire lever to
Check to be sure that the red setting lines on the cassette joint
bracket and pulley are aligned at this time.
4
Set to
The red setting lines on the cassette joint are located in two
places. Use the one that is easiest to see.
When bicycle is upside down
Should be straight
Cassette joint bracket
When bicycle is standing up
Should be straight
Cassette joint bracket
10 cm
15 cm
4
.
Red setting lines
Cassette joint pulley
Cassette joint pulley