Shimano CS-HG50-I Handbuch - Seite 5

Blättern Sie online oder laden Sie pdf Handbuch für Zubehör für Fahrräder Shimano CS-HG50-I herunter. Shimano CS-HG50-I 5 Seiten. Rear drive system

Seite drucken

5. SIS Adjustment

Operate the shifting lever several times to move the chain to the 2nd sprocket.

Then, while pressing the lever just enough to take up the play in the lever, turn

the crank arm.

When shifting to

3rd

Outer casing

adjustment

barrel

Tighten the outer cable adjusting

barrel until the chain returns to

the 2nd sprocket. (clockwise)

Best setting

The best setting is when the shifting lever is operated just

enough to take up the play and the chain touches the 3rd

sprocket and makes noise.

* Return the lever to its original position (the position where

the lever is at the 2nd sprocket setting and it has been

released) and then turn the crank arm clockwise. If the chain

is touching the 3rd sprocket and making noise, turn the outer casing

adjustment barrel clockwise slightly to tighten it until the noise stops and

the chain runs smoothly.

Operate lever to change gears, and check that no noise occurs in any of

the gear positions.

For the best SIS performance, periodically lubricate all power-transmission

parts.

Replacement of the freewheel body

After removing the hub axle,

remove the freewheel body fixing

bolt (inside the freewheel body),

and then replace the freewheel

body.

Note:

Do not attempt to disassemble

the freewheel body, because it

may result in a malfunction.

Tightening torque:

35 - 50 N·m {305 - 434 in. lbs.}

This service instruction explains how to use and maintain the Shimano bicycle parts which have

been used on your new bicycle. For any questions regarding your bicycle or other matters which

are not related to Shimano parts, please contact the place of purchase or the bicycle manufacturer.

One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003

Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222

Please note: specifications are subject to change for improvement without notice. (English)

When no sound at

all is heard

Outer casing

adjustment

barrel

Loosen the outer casing

adjustment barrel until the chain

touches the 3rd sprocket and

makes noise. (counter clockwise)

Freewheel body

Freewheel body fixing bolt

Disassembly

Assembly

Freewheel body washer

10 mm Allen key

(TL-WR37)

3-77 Oimatsu-cho Sakai-ku, Sakai, Osaka 590-8577, Japan