Shimano FC-M311-8 Dienstanweisungen
Blättern Sie online oder laden Sie pdf Dienstanweisungen für Zubehör für Fahrräder Shimano FC-M311-8 herunter. Shimano FC-M311-8 1 Seiten.
Seite drucken
General Safety Information
WARNING
• Be careful not to let the cuffs of your clothes get caught in the chain
while riding, otherwise you may fall off the bicycle.
• Check that the tension of the chain is correct and that the chain is not
damaged. If the tension is too weak or the chain is damaged, the
chain should be replaced. If this is not done, the chain may break
cause serious injury.
• Check that there are no cracks in the crank arms before riding the
bicycle. If there are any cracks, the crank arm may break and you
may fall off the bicycle.
• Obtain and read the service instructions carefully prior to installing
the parts. Loose, worn or damaged parts may cause the bicycle to
fall over and serious injury may occur as a result. We strongly
recommend only using genuine Shimano replacement parts.
• Obtain and read the service instructions carefully prior to installing
the parts. If adjustments are not carried out correctly, the chain may
come off and this may cause you to fall off the bicycle which could
result in serious injury.
• Read these Technical Service Instructions carefully, and keep them in
a safe place for later reference.
Note
• Be sure to use only the applicable chain and bottom bracket.
• Before riding the bicycle, check that there is no play or looseness in
the connection. Also, be sure to retighten the crank arms and pedals
at periodic intervals.
• If you feel any looseness in the bottom bracket axle, the bottom
bracket should be replaced.
• In addition, if pedaling performance does not feel normal, check this
once more.
• Do not wash the bottom bracket with high-pressure jets of water.
• Apply grease to the bottom bracket before installing it.
• To ensure the best performance, be sure to use only the specified
type of chain. The wide type of chain cannot be used.
• If the chain keeps coming off the chainrings during use, replace the
chainrings and the chain.
• You should periodically wash the chainrings in a neutral detergent
and then lubricate them again. In addition, cleaning the chain with
neutral detergent and lubricating it can be an effective way of
extending the useful life of the chainrings and the chain.
• Parts are not guaranteed against natural wear or deterioration
resulting from normal use.
• For maximum performance we highly recommend Shimano lubricants
and maintenance products.
• For any questions regarding methods of installation, adjustment,
maintenance or operation, please contact a professional bicycle
dealer.
Technical Service Instructions
FC-M411
FC-M410 / FC-M410-8
FC-M361 / FC-M361-8
FC-M311 / FC-M311-8
Specifications
Front chainwheel
Model number
Front chainwheel tooth combination
Bolt circle diameter
Crank arm length
Pedal thread dimensions
Applicable bottom bracket
Applicable front derailleur
*
The maximum applicable number of teeth for the BB mount-type front derailleur is 42T.
Bottom Bracket
Model number
Spindle length
Chain line
Shell width (Thread dimensions)
Applicable front chainwheel
Installation of the Bottom Bracket
Install using the special tool TL-UN74-S / TL-UN66. First install
the main body, then the adapter.
Adapter / bottom bracket tightening torque:
50 - 70 N·m {435 - 608 in. lbs.}
Adapter
Aluminum or steel
Plastic
SI-0094A-001
FC-M411
FC-M410
FC-M410-8
42 - 32 - 22 T
42 - 32 - 22 T
42 - 32 - 22 T
48 - 38 - 28 T
104 / 64 mm
B.C. 9/16" x 20 T.P.I. (English thread)
BB-UN26 (-K)
BB-UN26
BB-ES25
FD-M413 / M412 / M410-E *
BB-UN26 (-K)
BB-ES25 (-E)
LL123 (K)
118 (E)
FC-M411 / M361 / M311
FC-M410-8
Installation of the front chainwheel
Use an 8 mm Allen key or a cotterless crank extractor (TL-FC10) to install the front
chainwheel.
Main body
Securely tighten
One Holland, Irvine, California 92618, U.S.A. Phone: +1-949-951-5003
Industrieweg 24, 8071 CT Nunspeet, The Netherlands Phone: +31-341-272222
Please note: specifications are subject to change for improvement without notice. (English)
© Jan. 2009 by Shimano Inc. XBC IZM Printed in Malaysia.
FC-M361
FC-M361-8
FC-M311
42 - 32 - 22 T
42 - 32 - 22 T
42 - 32 - 22 T
48 - 38 - 28 T
48 - 38 - 28 T
170 / 175 mm
BB-UN26 (-K)
BB-ES25 (-K)
BB-UN26 (-K)
FD-M360 / M330 / M330-E *
BB-UN26 (-E)
BB-ES25
LL113 (E)
126 (K)
50 mm
68 / 73 mm (1.37 X 24 T.P.I.)
FC-M410
FC-M311-8
Allen key
Securely tighten
Front chainwheel tightening torque:
35 - 50 N·m {305 - 435 in. lbs.}
3-77 Oimatsu-cho, Sakai-ku, Sakai-shi, Osaka 590-8577, Japan
FC-M311-8
42 - 32 - 22 T
–
–
BB-ES25 (-K)
FD-M311 / M310
BB-ES25 (-K)
126 (K)
FC-M361-8