Shimano STEPS E6000 Benutzerhandbuch - Seite 46
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Fahrrad Shimano STEPS E6000 herunter. Shimano STEPS E6000 46 Seiten. Shimano steps e6000 battery and charger
Seite drucken
7.2
Charger
Display
Description
Cause
The red
There is a
LED flashes
charging fault.
continuously.
8.
Torque settings
DANGER
Only use appropriate tools to tighten screws and bolts. Observe
the specified torque setting. The component manufacturer's torque
settings take precedence (where available). Failure to comply can
result in screws/bolts becoming loose, tearing away or fracturing. If
that happens while you are riding the bike, components may come
off and you could have a severe crash. If screws are overtightened,
components can also be damaged. Tighten all screws and bolts
that are relevant for safety with a torque wrench. This indicates the
corresponding torque in newton metres (Nm).
If no values are shown on the component or component manuals, use the
torque settings from the following table.
EN-46
Original User Guide | Pedelec Shimano Steps E6000 Version 1
Remedy
Unplug the charger from the
mains immediately. If the
problem reoccurs, a new
battery charger is required.
Screw fixing
Pedal
Front axle nut
Rear axle nut
Ahead stem angle adjustment
Ahead stem steerer tube
Saddle clamp bottom
Saddle clamp top
Rim brake shoe
Disc brake calliper, Shimano, IS and PM
Disc brake calliper, AVID, IS and PM
Disc brake calliper, Magura, IS and PM
Gear lever clamp
Brake lever clamp
Cassette fixing ring
Screw-on handlebar plugs
Luggage rack
Thread
Tightening torque (Nm)
9/16
40
General
25 – 30
35 – 40
General
M6
8 – 10
M5 / M6 / M7
M5: 5 / M6: 10 / M7: 14
M5 / M6 / M8
M5: 5 / M6: 10 / M8: 20
M5 / M6 / M7
M5: 5.5 / M6: 5.5 / M7: 14 / M8:
/ M8
20
M6
10
M6
6 – 8
M6
8 – 10
M6
6
M5
5
M5
Ref. manufacturer's spec.
N/A
30 – 40
M4 / M5
M4: 3 / M5: 5
M5 / M6
M5: 5 – 6 / M6: 8 – 10