Digital Audio Labs LIVEMIX MIX-32 Benutzerhandbuch - Seite 11
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Mischpult Digital Audio Labs LIVEMIX MIX-32 herunter. Digital Audio Labs LIVEMIX MIX-32 15 Seiten. Central mixer and power distributor
Auch für Digital Audio Labs LIVEMIX MIX-32: Benutzerhandbuch (15 seiten)
Seite druckenLIVEMIX SYSTEM EXAMPLES
A Livemix system requires either an analog (AD-24) or digital input (option card), the MIX-16/MIX-
32 central mixer, and at least one Livemix personal mixer. Below are some examples of what a basic
system may look like.
ANALOG INPUT SYSTEM
1 x AD-24 Analog Input Rack Unit
1 x MIX-16 Central Mixer
4 x CS-DUO Dual Mix Personal Mixers
4 x MT-1 Dual Position Mounts
1 x CBL-CAT6-100 Shielded CAT6 Cable 100' **
4 x CBL-CAT6-50 Shielded CAT6 Cable 50'
**Shielded cable between AD-24 and MIX-16 (and the DA-816 if applicable) is required. CAT6 is not required, CAT5e is
acceptable.
ANALOG OR DIGITAL?
Users receiving their audio from an analog source will use the AD-24. Using the TRS or DB-25 inputs,
audio from the source is made available to the Livemix system.
Users receiving their audio from a digital source will use the Option Card (LM-DANTE-EXP). This is
an option card that is installed in the MIX-16/MIX-32 and allows the Livemix system to receive audio
from a digital device or network.
PERSONAL MIXER / CONTROL SURFACE
Livemix needs at least one connected personal mixer to make a mix. Each Livemix personal mixer
connects via CAT5e/CAT6 cable to one of the ports of the MIX-16/MIX-32. Using various controls
on the unit, users can each create their own custom mix, which is then output to headphones, in-ear
monitors or stage monitors, directly from the personal mixer or Livemix DA-816 analog output unit.
LIVEMIX MIX-16/32
DIGITAL INPUT SYSTEM
1 x MIX-16 Central Mixer
1 x LM-DANTE-EXP Dante option card
4 x CS-DUO Dual Mix Personal Mixers
4 x MT-1 Dual Position Mounts
1 x CBL-CAT6-100 Shielded CAT6 Cable 100' **
4 x CBL-CAT6-50 Shielded CAT6 Cable 50'
9