Crestron 4 Series Schnellstart-Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Kontrollsysteme Crestron 4 Series herunter. Crestron 4 Series 6 Seiten. Control processor for zūm lighting control system
Auch für Crestron 4 Series: Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart (5 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Erste Schritte (2 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (12 seiten)

DIN-AP4

4-Series™ DIN Rail Control System

To access the web configuration interface using the XiO Cloud service:

1. Connect the control system to the network.

2. Record the MAC address and serial number that are labeled on the top

of the control system. The MAC address and serial number are

required to add the device to the service.

3. Do either of the following

For existing accounts, access the XiO Cloud service at

https://portal.crestron.io.

For new accounts, register for a XiO Cloud account at

www.crestron.com/xio-cloud-registration.

4. Claim the device to the service as described in the

Guide (Doc.

8214).

5. Select the device from the cloud interface to view its settings.

The first time the web configuration interface is accessed, a dialog box is

displayed asking the user to create an admin account. A similar message

is displayed when connecting to the device in Crestron Toolbox software if

an admin account has not already been created.

To create an admin account:

1. Enter a username and password for the admin account in the

appropriate text fields.

XiO Cloud User

CAUTION: Do not lose the username and password for the admin

account, as the device must be reset to factory settings to regain

access.

2. Click OK. A dialog box is displayed stating that enabling authentication

will restart the web session.

3. Click Yes to confirm and restart. The username and password created

in step 1 must be entered to regain access to the web configuration

interface.

NOTE: The username and password must also be entered when

connecting to the device via Crestron Toolbox.

Create an Admin Account

Quick Start