Crestron 4 Series Schnellstart-Handbuch - Seite 9

Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Kontrollsysteme Crestron 4 Series herunter. Crestron 4 Series 12 Seiten. Control processor for zūm lighting control system
Auch für Crestron 4 Series: Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (8 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart (5 seiten), Schnellstart-Handbuch (6 seiten), Schnellstart-Handbuch (2 seiten), Schnellstart-Handbuch (2 seiten), Erste Schritte (2 seiten), Schnellstart-Handbuch (2 seiten)

Seite drucken
Crestron 4 Series Schnellstart-Handbuch
ZUM-HUB4
4-Series™ Control Processor for Zūm® Lighting Control System
NOTE: The numbers below correspond with the numbers in the Main
screen diagram.
1. Room Settings: Edit the Room Name, PIN, Floor ID, Zone ID, and
Network information.
2. Configuration: Edit the room logic to view the current state of the
room.
Occupancy Sensors: View details for the connected sensor(s)
l
or edit the sensor name.
Photo Sensors: View details for the connected sensor(s) or edit
l
the sensor name.
Load Controllers: Identify and view details for the connected
l
load controller(s).
ZUMLINK-JBOX-16A-LV and ZUMNET-JBOX-16A-LV load
o
controllers:
View Current Scene, Daylighting status, and Output
n
Level.
Override: The state of the load when Override is recalled.
n
Click the toggle to turn the load on or off during
Override.
Assign the occupancy mode (Occupancy menu), vacancy
n
mode (Vacancy menu), vicinity mode (Vicinity menu), and
daylight harvesting (Photo menu) to specific load
controllers.
View Dimming Values
n
Edit the Dimming Curve Configuration or Dimmer
n
Scenes Configuration.
ZUMLINK-JBOX-20A-PLUG load controller:
o
Override: The state of the load when Override is recalled.
n
Click the toggle to turn the load on or off during
Override.
Assign the occupancy mode (Occupancy menu), vacancy
n
mode (Vacancy menu), vicinity mode (Vicinity menu), and
daylight harvesting (Photo menu) to specific load
controllers.
ZUMLINK-JBOX-20A-SW load controller:
o
Closed: Click the toggle to turn the load on or off.
n
Override: The state of the load when Override is recalled.
n
Click the toggle to turn the load on or off during
Override.
Assign the occupancy mode (Occupancy menu), vacancy
n
mode (Vacancy menu), vicinity mode (Vicinity menu), and
daylight harvesting (Photo menu) to specific load
controllers.
Scenes: Allow keypad access to the scene by selecting or
n
deselecting the checkbox. Determine the state of the
load when the scene is recalled by clicking the toggle on
or off.
Quick Start
9