Crestron 4K DigitalMedia 3-Series Schnellstart - Seite 2

Blättern Sie online oder laden Sie pdf Schnellstart für Kontrollsysteme Crestron 4K DigitalMedia 3-Series herunter. Crestron 4K DigitalMedia 3-Series 2 Seiten. Media presentation controller
Auch für Crestron 4K DigitalMedia 3-Series: Ergänzendes Handbuch (20 seiten), Schnellstart-Handbuch (2 seiten), Aus dem Handbuch (2 seiten), Schnellstart-Handbuch (7 seiten), Schnellstart-Handbuch (8 seiten), Aus dem Handbuch (2 seiten), Aus dem Handbuch (2 seiten)

Seite drucken

Crestron 4K DigitalMedia 3-Series Schnellstart

Hold the magnetic bezel over the assembly.

Attach the bezel to the assembly, top side first, until the bezel magnetically snaps into

place against the assembly.

Attach top side

of bezel to

assembly first

Bezel

NOTE:

If the bezel is removed and then reattached to the assembly, there is a 20-second

delay before the buttons are functional.

(Optional) For a secure installation, screw either the remaining 4-40 x 1/4 in. Phillips screw

or the Torx security screw into the screw hole on the bottom of the bezel to secure the bezel

to the assembly.

Insert security

screw here

Bezel and assembly

(bottom view)

NOTE:

To remove the bezel from the assembly (required to access the icon chips and the

reset buttons), unscrew the security screw from the bottom of the bezel (if installed), and

then gently pull the bezel, bottom side first, away from the assembly until the magnetic

hold is broken.

Compliance and Legal

Original Instructions: The U.S. English version of this document is the original instructions. All

other languages are a translation of the original instructions.

Regulatory Model: M201902001

As of the date of manufacture, the product has been tested and found to comply with

specifications for CE marking.

This product is Listed to applicable UL® Standards and requirements tested by

Intertek® service.

Ce produit est homologué selon les normes et les exigences UL applicables par service

Intertek.

Federal Communications Commission (FCC) Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following

conditions: (1) This device may not cause harmful interference and (2) this device must accept

any interference received, including interference that may cause undesired operation.

CAUTION:

Changes or modifications not expressly approved by the manufacturer responsible

for compliance could void the user's authority to operate the equipment.

Configure the Device

The MPC3 device may be configured using Crestron Toolbox™ software and the included web-

based configuration utility.

To configure the MPC3 device:

Use the Device Discovery tool in Crestron Toolbox to discover the MPC3 device and its IP

address on the network.

Use Crestron Toolbox to set the time zone. For more information, refer to the Crestron

Toolbox help file.

Use a web browser to navigate to http://xxx.xxx.xxx.xxx/setup, where xxx.xxx.xxx.xxx is the

IP address of the MPC3 device. The 3-Series splash screen is displayed.

Assembly

NOTE:

If a security warning is displayed, click Install to continue.

Click Setup. The device setup page is displayed (MPC3-102 shown).

NOTE:

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Industry Canada (IC) Compliance Statement

CAN ICES-3 (B)/NMB-3(B)

The Setup page displays the IP address, hostname, and MAC address of the MPC3 device, as well

as a key that is used to register the MPC3 device with the MyCrestron service.

The Setup page also provides access to various setup and programming screens.

•

Click one of the setup selections to configure the applicable device settings.

•

Click the back button on any page to return to the previous screen.

Program the Device

Use the Device Discovery tool in Crestron Toolbox to discover the MPC3 device and its IP address

on the network, and then perform any necessary programming via TCP/IP over an Ethernet

connection. For more information on device discovery and programming, refer to the appropriate

sections of the embedded Crestron Toolbox help file.

NOTE:

Any press-and-hold functionality for device buttons must be programmed to less than 20

seconds.

Connect to Crestron XiO Cloud™ Service (Optional)

The Crestron XiO Cloud™ service allows supported Crestron devices across an enterprise to be

managed and configured from one central and secure location in the cloud. Supported devices

are configured to connect to the service. Use of the service requires a registered Crestron XiO

Cloud account.

NOTE:

The device may be disconnected from the service by navigating to the Cloud Services tab

in Crestron Toolbox software (Functions > Device Info > Cloud Services). For details, refer to the

Crestron Toolbox help file.

To connect the device to the Crestron XiO Cloud service:

Record the MAC address and serial number that are labeled on the shipping box or rear

panel of the device. The MAC address and serial number are required to add the device to

the Crestron XiO Cloud environment.

Enter the device IP address into a web browser to access the web configuration interface.

Click the Settings tab.

Click Cloud Settings to expand the selection.

Toggle the Cloud Configuration Service Connection switch to Enabled.

Do either of the following:

•

For Additional Information

Scan or click the QR codes for detailed product information.

MPC3-101-B

The product is a class 1 laser product. It complies with safety regulations of IEC 60825-1, FDA

21 CFR 1040.11 and FDA 21 CFR 1040.10.

WARNING:

Visible and invisible laser radiation when open. Avoid direct exposure to beam.

Le produit est un produit laser de classe 1. Il est conforme aux normes de sécurité IEC-60825-1,

FDA 21 CFR 1040.11 et FDA 21 CFR 1040.1

AVERTISSEMENT:

Rayonnement laser visible et invisible lorsqu'il est ouvert. Éviter l'exposition

directe au faisceau.

Produkten är en laserprodukt av klass 1. Det uppfyller säkerhetsbestämmelserna i IEC-60825-

1, FDA 21 CFR 1040.11 och FDA 21 CFR 1040.10

VARNING:

Synlig och osynlig laserstrålning vid öppning. Undvik direkt strålningsexponering.

Crestron product development software is licensed to Crestron dealers and Crestron Service

Providers (CSPs) under a limited non-exclusive, non-transferable Software Development

Tools License Agreement. Crestron product operating system software is licensed to Crestron

dealers, CSPs, and end-users under a separate End-User License Agreement. Both of these

Agreements can be found on the Crestron website at

www.crestron.com/legal/software_

license_agreement.

The product warranty can be found at www.crestron.com/warranty.

For existing accounts, navigate to https://portal.crestron.io.

For new accounts, register for an account at www.crestron.com/xio-cloud-registration.

MPC3-102-B

The specific patents that cover Crestron products are listed at

patents.

Certain Crestron products contain open source software. For specific information, please visit

www.crestron.com/opensource.

Crestron, the Crestron logo, 3-Series, Cresnet, Crestron Fusion, Crestron Toolbox, Crestron

XiO Cloud, and the MPC logo are either trademarks or registered trademarks of Crestron

Electronics, Inc. in the United States and/or other countries. Torx is either a trademark or a

registered trademark of Acument Intellectual Properties, LLC, in the United States and/or

other countries. Intertek is either a trademark or registered trademark of Intertek Group in

the United States and/or other countries. The ETL logo is either a trademark or registered

trademark of Intertek Testing Services NA in the United States and/or other countries. UL is

either a trademark or a registered trademark of Underwriters Laboratories, Inc. in the United

States and/or other countries. Other trademarks, registered trademarks, and trade names

may be used in this document to refer to either the entities claiming the marks and names or

their products. Crestron disclaims any proprietary interest in the marks and names of others.

Crestron is not responsible for errors in typography or photography.

Crestron Electronics, Inc.

15 Volvo Drive, Rockleigh, NJ 07647

Tel: 888.CRESTRON

Fax: 201.767.7576

www.crestron.com

www.crestron.com/legal/

Quick Start - Doc. 8424C

(2053084)

02.19

Specifications subject to

change without notice.