Accutone WT99 Handbuch - Seite 4

Blättern Sie online oder laden Sie pdf Handbuch für Kopfhörer Accutone WT99 herunter. Accutone WT99 10 Seiten. Dect headset system for telephones with handset lifter

Seite drucken
WT99 WIRELESS TELEPHONE HEADSET
your true wireless handsfree office solution!
Installation
A. Setting up Headset
Headset Body
The headset is composed of three parts: the Headset Body, the Headband
and the leatherette Ear Cushion. Assemble them together as shown below
before you proceed further.
Headband
Headset Body
2
1
Ear Cushion
5
Headband
Ear Cushion
First connect the headband to
the headset body by pusing the
knob through the hole, you
should feel a "click" sound as
firmly connected.
Secondly, connect the ear
cushion to the headset body in a
similar fashion until you can feel
the same "click" sound.
B. Connecting to Telephone
17
18
15
!
16
X
Y
P
[ inspiring people, inspiring change ]
Installation
Unplug the handset from your telephone
base, and plug the handset into the
Handset Connector
(18)
.
Connect one end of the RJ Modular Cable
(X)
to the Telephone Connector
under the base station, the other end of
the RJ Modular Cable
(Y)
goes into the
handset jack of your telephone unit
(where it used to connect to the
telephone handset).
Connect the Power Adaptor
(P)
Power Adaptor Jack
(15)
, then connect
to any power socket. (Make sure the
voltage specified on the adaptor
corresponds to your local electrical
power supply specifications.)
The power adaptor may come with
country-specific pin-adaptors, select the
one that fit the standard power socket of
your country. Simple install the adaptor by
facing the metal pins on the power
adaptor to the socket on the pin adaptor.
*Place the base station at least 15cm away
from the telephone to avoid interference.
(17)
to the
6