Crestron AirMedia AM-TX3-100 Handbuch - Seite 3
Blättern Sie online oder laden Sie pdf Handbuch für Empfänger Crestron AirMedia AM-TX3-100 herunter. Crestron AirMedia AM-TX3-100 5 Seiten. Connect adaptor
Seite drucken
downloaded to the receiver using Auto Update, and if an outdated Connect Adaptor comes
online a prompt will be shown on the Front of Room display indicating an update is
available. When this appears, users can follow the on-screen instructions to complete the
update (press and hold the peripheral button for 5 seconds).
Firmware version 1.0.1.133 introduces support for this feature; automatic updates will be
o
available with subsequent updates after manually updating to this version. This requires
AirMedia Series 3 receiver firmware version 3.0100.0066 or later.
Behavior Changes
•
Firmware releases for the AM-TX3-100(-I) are now provided as a zip file. AirMedia Series 3 receiver
version 3.0100.0066 and later supports selection of a zip file to update Connect Devices.
Fixed Issues
•
N/A
Known Issues
•
When using wireless conferencing with an AM-TX3-100(-I), the double tap to pause functionality is
not available. To pause the presentation, first end the conferencing session by tapping the peripheral
button.
•
Occasionally audio pops may be heard when using certain conferencing peripherals. This will be
addressed in a future release.
•
The Connect Adaptor generally takes about 6-15 seconds to connect and begin presenting, this will
vary based on environment. After unplugging the Connect Adaptor, it takes about 7 seconds for the
presentation to be removed from the Front of Room display.
•
When using a MacBook with an M2 chip, audio drops and popping sounds can be heard periodically.
•
When presenting from an iPad or MacBook, volume controls are not available on the user's device.
•
When running a long duration presentation from an AM-TX3-100(-I), the image may freeze on the
display, or the session may drop. Reconnect the AM-TX3-100(-I) to recover and resume presenting.
•
If an AM-TX3-100(-I) is left presenting from a laptop for a long duration, stopping and restarting the
presentation may lead to the device disconnecting. Reboot the AirMedia receiver to recover.
•
In certain scenarios, after running several long duration AM-TX3-100(-I) presentations, subsequent
connection attempts will be unsuccessful. Reboot the AirMedia receiver to recover.
•
Occasionally the AM-TX3-100(-I) will not automatically come back online and resume presenting
after a firmware update. Reconnect the AM-TX3-100(-I) to recover and perform the update again if it
was not successful.
•
When connected to a MacBook and the audio output is switched between the built in speaker and
the AM-TX3-100(-I).