Digital Electronics PS-2000B Series Installationshandbuch - Seite 14

Blättern Sie online oder laden Sie pdf Installationshandbuch für Lagerung Digital Electronics PS-2000B Series herunter. Digital Electronics PS-2000B Series 16 Seiten. Windows xp multi language preinstalled hard disk unit

Seite drucken

HDD Recovery Procedure

•

After performing hard disk recovery, the PS-B unit's

hard disk is returned to its factory shipped condition.

•

For recovery, the following things are required;

The PS-B unit, HDD to be recovered, a CD-ROM drive

(PSB-CD/FD01 or a commercial USB-type CD-ROM

drive), and a PS/2 keyboard.

Use the following steps used to recover the Windows

Preinstalled Hard Disk.

1. Insert the Recovery CD's Disk 1 into the CD-ROM drive and turn the PS-B

unit's power ON. Immediately after the power turns ON, keep pressing the

[F2] key. The unit's BIOS Setup Screen will appear.

2. Select [CDROM] for [First Boot Device] of [Advanced BIOS Features].

(When using a commercial USB-type CD-ROM drive, select [USB-CDROM]

for [First Boot Device].)

3. Press the [F10] key to save the setting and restart the PS-B unit.

4. After the PS-B unit restarts, the Symantec Ghost

5. After the Symantec Ghost

"Partition sizes correct?"

6. The volume displayed in New Size will be recovered. After confirming it,

press the [Yes] button. To change it, press the [No] button and go to the

[Destination Drive Details] dialog box. In the [Destination Drive Details]

dialog box, change the size of the New Size and press the [OK] button.

7. The [Question] dialog box will appear. Press the [Yes] button. It will be

reconfirmed that the data of the hard disk is all reset to the original values

at the time of delivery.

"Proceed with disk restore?

Destination drive will be permanently overwritten."

8. The Recovery CD's Disk 1's hard disk recovery program will start.

You will be prompted several times. Please replace the Recovery CD Disk

each time as instructed.

starts, the [Question] dialog box will appear.

-14-

XP Multi-Language

will automatically start.