ActronAir ECOFLEX MINI VRF MTC-028CS Benutzerhandbuch - Seite 6

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Klimagerät ActronAir ECOFLEX MINI VRF MTC-028CS herunter. ActronAir ECOFLEX MINI VRF MTC-028CS 20 Seiten. Two-way cassette

Seite drucken
3
3
3
3
3
3

Electric Safety Requirements

Owner's Manual
Electric Safety Requirements
Electric Safety Requirements
01.03. Electric Safety Requirements
[ Warning ]
[ Warning ]
[ Warning ]
WARNING
The air conditioner shall be installed according to the local wiring specifications.
•
The air conditioner shall be installed according to the local wiring specifications. Wiring work
The air conditioner shall be installed according to the local wiring specifications.
Wiring work must be completed by qualified electricians.
The air conditioner shall be installed according to the local wiring specifications.
must be completed by qualified electricians.
Wiring work must be completed by qualified electricians.
All wiring work must comply with electrical safety specifications.
Wiring work must be completed by qualified electricians.
•
All wiring work must comply with electrical safety specifications.
All wiring work must comply with electrical safety specifications.
The air conditioner must be well grounded. Specifically, the main switch of the air
All wiring work must comply with electrical safety specifications.
•
The air conditioner must be well grounded. Specifically, the main switch of the air conditioner
The air conditioner must be well grounded. Specifically, the main switch of the air
conditioner must have a reliable grounding cable.
The air conditioner must be well grounded. Specifically, the main switch of the air
must have a reliable grounding cable.
conditioner must have a reliable grounding cable.
Before contacting wiring devices, cut off all the power supplies.
conditioner must have a reliable grounding cable.
•
Before contacting wiring devices, cut off all the power supplies.
Before contacting wiring devices, cut off all the power supplies.
The user MAY NOT disassemble or repair the air conditioner. Doing so can be dangerous. In
Before contacting wiring devices, cut off all the power supplies.
The user MAY NOT disassemble or repair the air conditioner. Doing so can be dangerous. In
•
the event of a fault, immediately cut off the power and contact your local dealer or technical
The user MAY NOT disassemble or repair the air conditioner. Doing so can be dangerous. In the event of a fault,
The user MAY NOT disassemble or repair the air conditioner. Doing so can be dangerous. In
the event of a fault, immediately cut off the power and contact your local dealer or technical
immediately cut off the power and contact your local dealer or technical support.
support.
the event of a fault, immediately cut off the power and contact your local dealer or technical
support.
A separate power supply that meets the rated parameter values must be provided for the air
•
A separate power supply that meets the rated parameter values must be provided for the air conditioner.
support.
A separate power supply that meets the rated parameter values must be provided for the air
conditioner.
•
The fixed wiring to which the air conditioner is connected must be equipped with a power cut-off
A separate power supply that meets the rated parameter values must be provided for the air
conditioner.
The fixed wiring to which the air conditioner is connected must be equipped with a power
device that meets the wiring requirements.
conditioner.
The fixed wiring to which the air conditioner is connected must be equipped with a power
cut-off device that meets the wiring requirements.
The fixed wiring to which the air conditioner is connected must be equipped with a power
•
To avoid danger, a damaged power cable must be replaced by professionals from the
cut-off device that meets the wiring requirements.
To avoid danger, a damaged power cable must be replaced by professionals from the
cut-off device that meets the wiring requirements.
maintenance department or a similar department of the manufacturer.
To avoid danger, a damaged power cable must be replaced by professionals from the
maintenance department or a similar department of the manufacturer.
To avoid danger, a damaged power cable must be replaced by professionals from the
•
The air conditioner's circuit board (PCB) is designed with a fuse to provide overcurrent
maintenance department or a similar department of the manufacturer.
The air conditioner's circuit board (PCB) is designed with a fuse to provide overcurrent
maintenance department or a similar department of the manufacturer.
protection.
The air conditioner's circuit board (PCB) is designed with a fuse to provide overcurrent
protection.
The air conditioner's circuit board (PCB) is designed with a fuse to provide overcurrent
protection.
•
The specifications of the fuse are printed on the circuit board.
The specifications of the fuse are printed on the circuit board.
protection.
The specifications of the fuse are printed on the circuit board.
NOTE: For the units with R32 refrigerant , only the blast-proof ceramic fuse can be used.
•
NOTE: For the units with R-32 refrigerant , only the blast-proof ceramic fuse can be used.
The specifications of the fuse are printed on the circuit board.
NOTE: For the units with R32 refrigerant , only the blast-proof ceramic fuse can be used.
NOTE: For the units with R32 refrigerant , only the blast-proof ceramic fuse can be used.
CAUTION
[ Caution ]
[ Caution ]
[ Caution ]
Always ground the main power switch.
Always ground the main power switch.
Always ground the main power switch.
Do not use a damaged power cable and replace it if it is damaged.
Do not use a damaged power cable and replace it if it is damaged.
Always ground the main power switch.
Do not use a damaged power cable and replace it if it is damaged.
When the air conditioner is used for the first time or is in a power-off state for a long time, it
When the air conditioner is used for the first time or is in a power-off state for a long time, it needs to be
Do not use a damaged power cable and replace it if it is damaged.
When the air conditioner is used for the first time or is in a power-off state for a long time, it
needs to be connected to the power supply and warmed up for at least 12 hours before use.
connected to the power supply and warmed up for at least 12 hours before use.
When the air conditioner is used for the first time or is in a power-off state for a long time, it
needs to be connected to the power supply and warmed up for at least 12 hours before use.
needs to be connected to the power supply and warmed up for at least 12 hours before use.
4
4
4
4
4
4
Appendix
Appendix
Appendix
[ Warning ]
[ Warning ]
[ Warning ]
The following applies to R32 refrigerant systems.
The following applies to R32 refrigerant systems.
Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to ensure
The following applies to R32 refrigerant systems.
Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to ensure
that the risk of ignition is minimized.
Prior to beginning work on systems containing flammable refrigerants, safety checks are necessary to ensure
that the risk of ignition is minimized.
For repair to the refrigerating system, the following precautions shall be complied with prior to conducting work
that the risk of ignition is minimized.
For repair to the refrigerating system, the following precautions shall be complied with prior to conducting work
on the system.
For repair to the refrigerating system, the following precautions shall be complied with prior to conducting work
on the system.
Work shall be undertaken under a controlled procedure so as to minimise the risk of a flammable gas or vapour
on the system.
Work shall be undertaken under a controlled procedure so as to minimise the risk of a flammable gas or vapour
being present while the work is being performed.
Work shall be undertaken under a controlled procedure so as to minimise the risk of a flammable gas or vapour
being present while the work is being performed.
All maintenance staff and others working in the local area shall be instructed on the nature of work being carried
being present while the work is being performed.
All maintenance staff and others working in the local area shall be instructed on the nature of work being carried
out. Work in confined spaces shall be avoided. The area around the workspace shall be sectioned off. Ensure
All maintenance staff and others working in the local area shall be instructed on the nature of work being carried
out. Work in confined spaces shall be avoided. The area around the workspace shall be sectioned off. Ensure
that the conditions within the area have been made safe by control of flammable material.
out. Work in confined spaces shall be avoided. The area around the workspace shall be sectioned off. Ensure
that the conditions within the area have been made safe by control of flammable material.
The area shall be checked with an appropriate refrigerant detector prior to and during work, to ensure the
that the conditions within the area have been made safe by control of flammable material.
The area shall be checked with an appropriate refrigerant detector prior to and during work, to ensure the
technician is aware of potentially flammable atmospheres.
The area shall be checked with an appropriate refrigerant detector prior to and during work, to ensure the
technician is aware of potentially flammable atmospheres.
technician is aware of potentially flammable atmospheres.
6
Owner's Manual ECOFLEX MINI VRF R-32 SERIES - 2 WAY CASSETTE
Doc. No.9590-4028-03 Ver. 1 230823
03
ECOFLEX MINI VRF R-32 SERIES
03
Safety Warning
Safety Warning