Digital Equipment VAX 4000 600A Checkliste für die Installation - Seite 7
Blättern Sie online oder laden Sie pdf Checkliste für die Installation für Desktop Digital Equipment VAX 4000 600A herunter. Digital Equipment VAX 4000 600A 8 Seiten.
Seite drucken2.7 Connect Additional Devices to the System
Did you connect terminals and printers to the system? (Installation)
Did you connect telephone modems to the system? (Installation)
Did you connect the system to a network? (Installation)
Did you connect the KZQSA internal cable, if required? (Installation)
2.8 Connect an Expander, If Required
Are you installing an expander with your system? If so, begin installing the
expander now. When the installation is complete, return to this checklist.
(Expander manual, system Installation)
If you are installing a DSSI configuration, did you connect a ground cable
between the expander and your system? (Installation)
2.9 Connect the System Power Cable
Did you turn off the system and all its devices? (Installation)
Did you connect the power cable to the system and to a wall outlet or other
power source? (Installation)
2.10 Turn On the System and Select a Language
Did you turn on the console terminal and observe proper self-tests? (Terminal
owner's manual)
Did you turn on the system by setting the Power switch to on (1)?
(Installation)
Did you select a language and save it by turning the Power-Up Mode switch
to Run mode (indicated by an arrow)? (Installation)
2.11 Close the System Doors
Did you close the front doors? (Installation)
Did you turn the key to the middle position to lock both doors or to the top
position to leave the upper door unlocked? (Installation)
5