Bittel 68-10S(3) Benutzerhandbuch - Seite 5
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Telefon Bittel 68-10S(3) herunter. Bittel 68-10S(3) 7 Seiten.
Seite drucken
3.16 Set Time
Under AUDIO OFF mode (not LINE IN or FM-RADIO
working mode) to set the time
1) Press VOLUME- key 1S，hour digit flashing on the
LCD , press TUNING+/- to adjust hour.
2) Press VOLUME- key, minute digit flashing, press
TUNING+/- to adjust minute.
3) Press VOLUME- key or no operation to finish the
setting.
4) Press VOLUME+ key to adjust 12 hour format and 24
hour format.
3.17 Set alarm
3.17.1 Set Alarm Time
1) Press ALARM SET key, the hour digit display on the
LCD, press the VOLUME+/- to adjust the hour.
2) Then press the ALARM SET key, the minute display
on the CLD, press VOLUME+/- to adjust the minute.
3) Then press the ALARM SET key or no operation to
finish the setting.
3.17.2 Unlock the Alarm
Press ALARM key to start and close alarm. In start mode
the alarm and its mark on the top right corner, when in
close mode, the alarm and its mark disappear.
3.17.3 Alarm snooze feature
When alarm ringing, press any key and the alarm stop
ringing for 10 minutes. After 10 minutes it will ring again.
Pressing any other key except for ALARM key or
telephone off-hook can stop ringing.Alarm ringing during
playing mode, it exist playing mode automatically. In
AUDIO OFF mode, press ALARM VOLUME key to
adjust the alarm indicator volume, each press increase 5,
the top level is 20. The default is 10.
3.18 Change clock's battery
Take off the battery from the battery cabinet on the back
of the phone. Then install new battery. The specification
of the battery is 3V, 50Mah.
Note: The anode of the battery should be toward outside.
The battery should be changed every two years
3.19 Remote Time Setting
3.19.1 First install two 7# 1.5V batteries into the before
using it. Pay attention to the polarity of the battery. Don't
mix the old and new batteries.
Remote Time Control
3.19.2 Set time with the Remote Time Control
1) Press TIME SET key, hour digits flashing, press
UP/DOWN key to adjust,
2) Press TIME SET key, press UP/DOWN key to adjust
minute,
3) Press TIME SET key, press UP/DOWN key to adjust
month,
---- Page 5----
1. LCD Display
2. DST SET key——Set DST
time.
3. TIME SET key——Set time
and date.
4. TIME PROG key——Adjust
time and date .
5. DST PROG key ——Adjust
DST time.
6. UP key —— Upward key.
7. DOWN key——Downward
key.